Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
BW-TEC AG
Hofstr. 1,
8181
Hoeri
Switzerland
Switzerland
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
This company is main exhibitor of
Location
Hall map
Fairground map
Contact
Head of Sales Ruedi Altorfer
Email
info@bwtec.com
Please log in
You must be logged in to use matchmaking
Please log in for matchmaking
Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.
Let's get started!
Welcome to Matchmaking. Would you like to get in touch with ?
Our range of products
Product categories
- 01 Manufacturing of components
- 01.03 Toolmaking, mold making
Toolmaking, mold making
- 01 Manufacturing of components
- 01.06 Laser processing
- 01.06.02 Laser welding
Laser welding
- 02 Manufacturing of finished products
- 02.09 Electromedical devices
Electromedical devices
- 04 Manufacturing equipment
- 04.04 Laser processing equipment
Laser processing equipment
- 04 Manufacturing equipment
- 04.11 Quality assurance
- 04.11.03 Measuring technolgy, testing technology
Measuring technolgy, testing technology
Our products
Product category: Laser welding
1410 Laser Machine
The 1410 Laser Welding Machine is used to connect fine plastic tubing.
This machine is ideal for welding of balloon catheters. This connection technology allows short, soft and flexible welding-connections. The end result is precisely reproducible.
The touch screen user interface enables process data and user management.
This machine is ideal for welding of balloon catheters. This connection technology allows short, soft and flexible welding-connections. The end result is precisely reproducible.
The touch screen user interface enables process data and user management.
Product category: Laser welding
1530 Motion Laser Machine
The Motion Laser Welding Machine is used to connect fine plastic tubing. This machine is ideal for welding of balloon catheters.
This connection technology allows short, soft and flexible welding-connections. The end result is precisely reproducible.
In the machine 1530 the product is not rotated! The laser beam rotates around the components arranged on a mandrel.
This connection technology allows short, soft and flexible welding-connections. The end result is precisely reproducible.
In the machine 1530 the product is not rotated! The laser beam rotates around the components arranged on a mandrel.
Product category: Toolmaking, mold making
1555 1-4 UP Balloon Forming Machine
The vertical 1555 Balloon Machine is designed for the production of a wide range of different high-quality plastic balloons and convinces with its small footprint for an optimal use of production floor space. The vertical layout is ideal for a primary-secondary concept, where up to three additional machines can be connected to gradually meet growing production demands.
The colored illumination shows the current process status of the machine for a user-friendly application.
The colored illumination shows the current process status of the machine for a user-friendly application.
Product category: Toolmaking, mold making
2550 1UP Balloon Forming Machine
The 2550 Balloon Forming Machine is designed for the production of a wide range of polymer balloons for angioplasty and other medical applications. The electrically heated stretch blow molding process enables the production of various very accurate and repeatable high-quality balloons with tight tolerances in an extensive variety of sizes and shapes.
The standard machine convinces with the modular options to adapt the machine to specific customer needs.
The standard machine convinces with the modular options to adapt the machine to specific customer needs.
Product category: Toolmaking, mold making
2430 Split Mold Balloon Forming Machine
The 2430 Balloon Forming Machine is designed to produce a variety of soft balloons. The electrically heated stretch, pump-blow molding process allows the production of different high-quality balloons for medical applications. The split allows the production of different balloons with complicated shapes. The machine is characterized by a short process time.
Product category: Measuring technolgy, testing technology
2026 Burst Tester
The Burst Tester is a Hydraulic Burst Tester designed for customers in the field of development and production of angioplasty catheters. The control system gives the opportunity to choose different pressure cycles for products with specific requirements, and store these as a dataset. The machine delivers pressurized distilled water and can perform the following tests:
Burst Test:Pressure is built up continuously to the burst pressure.
Compliance Test:Pressure is built up in steps.
Multiple Inflation Test:A building up of the same pressure occurs repeatedly.
Burst Test:Pressure is built up continuously to the burst pressure.
Compliance Test:Pressure is built up in steps.
Multiple Inflation Test:A building up of the same pressure occurs repeatedly.
Product category: Measuring technolgy, testing technology
1942 Leack Tester
This leak tester is used for the simultaneous final inspection of up to eight balloon catheters.
The product is subjected to a specific pressure or vacuum and held for a defined time. The corresponding LED flashes when the pressure drops below the specification.
The process parameters can be entered and managed via the user interface. The process data is displayed directly and can be visualized graphically in the test report. The process can consist of up to five parameter steps, which start automatically or manually.
The balloons can be deflated with a vacuum pump after the test.
The product is subjected to a specific pressure or vacuum and held for a defined time. The corresponding LED flashes when the pressure drops below the specification.
The process parameters can be entered and managed via the user interface. The process data is displayed directly and can be visualized graphically in the test report. The process can consist of up to five parameter steps, which start automatically or manually.
The balloons can be deflated with a vacuum pump after the test.
Product category: Electromedical devices
2269 Coating Machine
The Hydrophilic Coating Machine is used for coating of catheter production assemblies.
Up to 21 products are coated simultaneously by dipping and subsequent UV exposure in a controlled environment. A pneumatic system enables automatic switching between two rows of coating tubes (base coat and top coat). The machine is also equipped with a temperature and humidity sensor and two digital cameras to monitor the process.
This machine is equipped with a BW-TEC HMI, touch screen and PC for recipe management.
Up to 21 products are coated simultaneously by dipping and subsequent UV exposure in a controlled environment. A pneumatic system enables automatic switching between two rows of coating tubes (base coat and top coat). The machine is also equipped with a temperature and humidity sensor and two digital cameras to monitor the process.
This machine is equipped with a BW-TEC HMI, touch screen and PC for recipe management.
About us
Company portrait
BW-TEC AG
Product and Service Category
BW-TEC AG offers a comprehensive and leading-edge line of equipment for balloon production, catheter manufacturing, coating and testing for the medical device industry. This includes machinery for balloon forming, welding, necking, cutting, coating, testing, mold production and more.
Commitment to Quality
All of our equipment has been designed based upon listening to customer feedback as well as our own extensive experience and expertise in the medical field.
Swiss quality is ensured through more than 20 years of engineering experience in the industry and by designing and manufacturing all equipment in Switzerland.
Custom development projects
BW-TEC AG is a trusted partner and an equipment manufacturer for the medical device industry and specialized in developing and building customized equipment for a wide range of applications. We support customers in design and product development during all phases of a project with foresight and efficiency.
Product and Service Category
BW-TEC AG offers a comprehensive and leading-edge line of equipment for balloon production, catheter manufacturing, coating and testing for the medical device industry. This includes machinery for balloon forming, welding, necking, cutting, coating, testing, mold production and more.
Commitment to Quality
All of our equipment has been designed based upon listening to customer feedback as well as our own extensive experience and expertise in the medical field.
Swiss quality is ensured through more than 20 years of engineering experience in the industry and by designing and manufacturing all equipment in Switzerland.
Custom development projects
BW-TEC AG is a trusted partner and an equipment manufacturer for the medical device industry and specialized in developing and building customized equipment for a wide range of applications. We support customers in design and product development during all phases of a project with foresight and efficiency.