Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
IMT, LLC
1st, Kuryanovskaya Street, 34, Building,
109235
Moscow
Russian Federation
Russian Federation
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
This company is co-exhibitor of
Moscow Export Center ANPO
Contact
Our range of products
Product categories
- 04 Physiotherapy / orthopaedic technology
- 04.17 Other equipment and devices for physiotherapy and orthopaedy
Other equipment and devices for physiotherapy and orthopaedy
Our products
Product category: Other equipment and devices for physiotherapy and orthopaedy
Thermoplastic list perforated: 600х500х3 mm; 400х400х3 mm; 200х200х2,5 mm.
Low-temperature thermoplastics – approved solution to use by forward-looking practitioners for external immobilization after bone fractures. Until recently plastic- or polymer-based casts were considered affordable only for patients ready to pay extra for comfortable rehabilitation. Our company Innovative Medical Tools responded to consumer expectations by developing ORDEKT.
ORDEKT — low-temperature melting plastic with foam two-sided polyurethane covering. Under heating the material becomes soft and suitable for molding. During the modeling process the plastic’s temperature remains comfortable for a patient. Within a few minutes ORDEKT finally cools down and forms lightweight but rigid and tight-fitting structure for immobilization. Material plastic memory allows the medical practitioners at any time to adjust the shape of orthosis considering the dynamics of recovery.
ORDEKT is efficient and convenient to use for medical practitioners and it is extremely comfortable for the patients. Another significant advantage is its reasonable price. During recent survey conducted in Innovative Medical Tools we have interviewed more than 600 respondents who had to deal with immobilization after bone fractures. The results showed that the cost of IMT orthoses is close to the expectations of most patients. According to respondents ORDEKT is an ideal material to meet the needs for contemporary medical treatment for reasonable price.
ORDEKT — low-temperature melting plastic with foam two-sided polyurethane covering. Under heating the material becomes soft and suitable for molding. During the modeling process the plastic’s temperature remains comfortable for a patient. Within a few minutes ORDEKT finally cools down and forms lightweight but rigid and tight-fitting structure for immobilization. Material plastic memory allows the medical practitioners at any time to adjust the shape of orthosis considering the dynamics of recovery.
ORDEKT is efficient and convenient to use for medical practitioners and it is extremely comfortable for the patients. Another significant advantage is its reasonable price. During recent survey conducted in Innovative Medical Tools we have interviewed more than 600 respondents who had to deal with immobilization after bone fractures. The results showed that the cost of IMT orthoses is close to the expectations of most patients. According to respondents ORDEKT is an ideal material to meet the needs for contemporary medical treatment for reasonable price.
Product category: Other equipment and devices for physiotherapy and orthopaedy
Elbow joint orthosis
Low-temperature thermoplastics – approved solution to use by forward-looking practitioners for external immobilization after bone fractures. Until recently plastic- or polymer-based casts were considered affordable only for patients ready to pay extra for comfortable rehabilitation. Our company Innovative Medical Tools responded to consumer expectations by developing ORDEKT.
ORDEKT — low-temperature melting plastic with foam two-sided polyurethane covering. Under heating the material becomes soft and suitable for molding. During the modeling process the plastic’s temperature remains comfortable for a patient. Within a few minutes ORDEKT finally cools down and forms lightweight but rigid and tight-fitting structure for immobilization. Material plastic memory allows the medical practitioners at any time to adjust the shape of orthosis considering the dynamics of recovery.
ORDEKT is efficient and convenient to use for medical practitioners and it is extremely comfortable for the patients. Another significant advantage is its reasonable price. During recent survey conducted in Innovative Medical Tools we have interviewed more than 600 respondents who had to deal with immobilization after bone fractures. The results showed that the cost of IMT orthoses is close to the expectations of most patients. According to respondents ORDEKT is an ideal material to meet the needs for contemporary medical treatment for reasonable price.
ORDEKT — low-temperature melting plastic with foam two-sided polyurethane covering. Under heating the material becomes soft and suitable for molding. During the modeling process the plastic’s temperature remains comfortable for a patient. Within a few minutes ORDEKT finally cools down and forms lightweight but rigid and tight-fitting structure for immobilization. Material plastic memory allows the medical practitioners at any time to adjust the shape of orthosis considering the dynamics of recovery.
ORDEKT is efficient and convenient to use for medical practitioners and it is extremely comfortable for the patients. Another significant advantage is its reasonable price. During recent survey conducted in Innovative Medical Tools we have interviewed more than 600 respondents who had to deal with immobilization after bone fractures. The results showed that the cost of IMT orthoses is close to the expectations of most patients. According to respondents ORDEKT is an ideal material to meet the needs for contemporary medical treatment for reasonable price.
Product category: Other equipment and devices for physiotherapy and orthopaedy
Ankle joint orthosis
Low-temperature thermoplastics – approved solution to use by forward-looking practitioners for external immobilization after bone fractures. Until recently plastic- or polymer-based casts were considered affordable only for patients ready to pay extra for comfortable rehabilitation. Our company Innovative Medical Tools responded to consumer expectations by developing ORDEKT.
ORDEKT — low-temperature melting plastic with foam two-sided polyurethane covering. Under heating the material becomes soft and suitable for molding. During the modeling process the plastic’s temperature remains comfortable for a patient. Within a few minutes ORDEKT finally cools down and forms lightweight but rigid and tight-fitting structure for immobilization. Material plastic memory allows the medical practitioners at any time to adjust the shape of orthosis considering the dynamics of recovery.
ORDEKT is efficient and convenient to use for medical practitioners and it is extremely comfortable for the patients. Another significant advantage is its reasonable price. During recent survey conducted in Innovative Medical Tools we have interviewed more than 600 respondents who had to deal with immobilization after bone fractures. The results showed that the cost of IMT orthoses is close to the expectations of most patients. According to respondents ORDEKT is an ideal material to meet the needs for contemporary medical treatment for reasonable price.
ORDEKT — low-temperature melting plastic with foam two-sided polyurethane covering. Under heating the material becomes soft and suitable for molding. During the modeling process the plastic’s temperature remains comfortable for a patient. Within a few minutes ORDEKT finally cools down and forms lightweight but rigid and tight-fitting structure for immobilization. Material plastic memory allows the medical practitioners at any time to adjust the shape of orthosis considering the dynamics of recovery.
ORDEKT is efficient and convenient to use for medical practitioners and it is extremely comfortable for the patients. Another significant advantage is its reasonable price. During recent survey conducted in Innovative Medical Tools we have interviewed more than 600 respondents who had to deal with immobilization after bone fractures. The results showed that the cost of IMT orthoses is close to the expectations of most patients. According to respondents ORDEKT is an ideal material to meet the needs for contemporary medical treatment for reasonable price.
Product category: Other equipment and devices for physiotherapy and orthopaedy
Wrist joint orthosis
Low-temperature thermoplastics – approved solution to use by forward-looking practitioners for external immobilization after bone fractures. Until recently plastic- or polymer-based casts were considered affordable only for patients ready to pay extra for comfortable rehabilitation. Our company Innovative Medical Tools responded to consumer expectations by developing ORDEKT.
ORDEKT — low-temperature melting plastic with foam two-sided polyurethane covering. Under heating the material becomes soft and suitable for molding. During the modeling process the plastic’s temperature remains comfortable for a patient. Within a few minutes ORDEKT finally cools down and forms lightweight but rigid and tight-fitting structure for immobilization. Material plastic memory allows the medical practitioners at any time to adjust the shape of orthosis considering the dynamics of recovery.
ORDEKT is efficient and convenient to use for medical practitioners and it is extremely comfortable for the patients. Another significant advantage is its reasonable price. During recent survey conducted in Innovative Medical Tools we have interviewed more than 600 respondents who had to deal with immobilization after bone fractures. The results showed that the cost of IMT orthoses is close to the expectations of most patients. According to respondents ORDEKT is an ideal material to meet the needs for contemporary medical treatment for reasonable price.
ORDEKT — low-temperature melting plastic with foam two-sided polyurethane covering. Under heating the material becomes soft and suitable for molding. During the modeling process the plastic’s temperature remains comfortable for a patient. Within a few minutes ORDEKT finally cools down and forms lightweight but rigid and tight-fitting structure for immobilization. Material plastic memory allows the medical practitioners at any time to adjust the shape of orthosis considering the dynamics of recovery.
ORDEKT is efficient and convenient to use for medical practitioners and it is extremely comfortable for the patients. Another significant advantage is its reasonable price. During recent survey conducted in Innovative Medical Tools we have interviewed more than 600 respondents who had to deal with immobilization after bone fractures. The results showed that the cost of IMT orthoses is close to the expectations of most patients. According to respondents ORDEKT is an ideal material to meet the needs for contemporary medical treatment for reasonable price.
About us
Company details
ORDEKT — special product for for external immobilization of limbs after bone fracture.
IMT (Innovative Medical Tools) – Russian company (based in Moscow) specialized in the production of innovative products for traumatology and orthopedics.
Low-temperature melting plastic is a real innovation in immobilization.