Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
ZAO TREK-E KOMPOSIT z.a.o.
P.O. Box 109028,
109028
Moscow
Moscow, Khohlovsky Per., 13, P. 1, Moscow Moscow
Russian Federation
Moscow, Khohlovsky Per., 13, P. 1, Moscow Moscow
Russian Federation
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
This company is co-exhibitor of
Moscow Export Center ANPO
Media files
Contact
Mikhail Shevchuk
Head of Marketing Department
Our range of products
Product categories
- 01 Electromedical equipment / medical technology
- 01.05 Implants and protheses
- 01.05.03 Orthopaedic implants and prostheses
Orthopaedic implants and prostheses
Our products
Product category: Orthopaedic implants and prostheses
PROTREK-1MZ (cement fixation)
The femoral component (stem) is made of stainless steel. It has a wedge shape with pronounced depressions along the entire length for fixation in the cement mantle. Cervical-diaphyseal angle neck-shaft angle 135º. Cone for planting head 12/14 ("Eurocone"). It is made in 10 sizes.
The head of the endoprosthesis is made of cobalt-chromium molybdenum alloy, or stainless steel. The unique diamond smoothing technology provides a deviation from sphericity equal to a radial displacement of less than 8 microns and a high surface purity.
The acetabular component (Cup) is made of ultra-high molecular weight polyethylene. Radiopaque rings allow to control the position of the component on the radiograph.
The head of the endoprosthesis is made of cobalt-chromium molybdenum alloy, or stainless steel. The unique diamond smoothing technology provides a deviation from sphericity equal to a radial displacement of less than 8 microns and a high surface purity.
The acetabular component (Cup) is made of ultra-high molecular weight polyethylene. Radiopaque rings allow to control the position of the component on the radiograph.
Product category: Orthopaedic implants and prostheses
PROTREK-2CZ (cementless fixation)
The femoral component (stem) is made of titanium alloy. The rough surface structure is achieved by high-energy treatment with silicon dioxide, which in combination with a special geometry provides high primary stability in the patient's bone. Cone for planting head 12/14 ("Eurocone").
The acetabular component (Cup) is made of titanium alloy, the outer surface is coated with a three-layer coating of variable porosity of titanium VT1-0. This coating promotes early osteointegration.
The head of the endoprosthesis is made of cobalt-chromium molybdenum alloy, or stainless steel. The unique diamond smoothing technology provides a deviation from sphericity equal to a radial displacement of less than 8 microns and high purity surfaces.
The acetabular component insert is made of UHWMPE. It has effective thickness of material in wear zone not less than 6 mm, which provides long service life of friction pair. It is available in versions with anti-exuberance cap for different diameters of endoprosthesis head.
The acetabular component (Cup) is made of titanium alloy, the outer surface is coated with a three-layer coating of variable porosity of titanium VT1-0. This coating promotes early osteointegration.
The head of the endoprosthesis is made of cobalt-chromium molybdenum alloy, or stainless steel. The unique diamond smoothing technology provides a deviation from sphericity equal to a radial displacement of less than 8 microns and high purity surfaces.
The acetabular component insert is made of UHWMPE. It has effective thickness of material in wear zone not less than 6 mm, which provides long service life of friction pair. It is available in versions with anti-exuberance cap for different diameters of endoprosthesis head.
Company news
Date
Topic
Download
Nov 14, 2020
Production of hip joint endoprostheses using equipment from DMG MORI Russia
About us
Company details
About TREK-E KOMPOSIT
TREK-E KOMPOSIT has been constructing and manufacturing hip joint endoprostheses since 2002. We use both our own capacities as well as cooperation with enterprises of aerospace industry and nuclear industry.
During this time our company has developed designs and introduced more than 10 types of endoprostheses into production. All designs have successfully passed the full cycle of technical and medical tests.
TREK-E KOMPOSIT has been constructing and manufacturing hip joint endoprostheses since 2002. We use both our own capacities as well as cooperation with enterprises of aerospace industry and nuclear industry.
During this time our company has developed designs and introduced more than 10 types of endoprostheses into production. All designs have successfully passed the full cycle of technical and medical tests.
Company data
Area of businessElectromedical equipment / Medical Technology