Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
Please log in
You must be logged in to send the contact request.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
Series CP directly operated and pressure compensated proportional solenoid valves
Series CP directly operated proportional solenoid valves can be used where an open loop flow control is required, with gas mixtures or to control flows. Their cartridge design makes them particularly compact, thus they can be mounted directly near the workstation. Series CP valves have been designed to optimize dimensions and reduce friction and stick-slip effects. The output flow is proportional to the control signal. Apart from the pressure compensated version, these valves can work also in vacuum. A minimum working pressure is thus not required.
High flow and great precision
Pressure compensated version (size 20mm only) available
Series AP directly operated 2/2-way proportional solenoid valves, NC, with nominal diameters range from 0.8 to 2.4 mm, can be used where an open loop flow control is required, with gas mixtures, to control free flows or blows, or emptying chambers using vacuum. Series AP proportional valves have been manufactured to optimize and reduce friction and stick-slip effects. The output flow is proportional to the control signal. As they can work also in vacuum, a minimum working pressure is not required.
Product category: Other components, modules, OEM equipment
Series TC Pressure Microregulators
The Series TC pressure regulator has been designed to be used for all the applications and equipment where it is needed to insert the single component in customized integrated pneumatic circuits (manifolds) or collectors. The cartridge design and the compact size allow the regulator to be plugged in a proper seat, making the installation easier and reducing the assembly time. To produce the new TC regulator, materials have been analized and chosen on the basis of their suitability with the contact medium. The body in PPS and the seals in FKM ensure thus full compatibility with a wide range of gaseous fluids.
Series K8P electronic proportional micro regulator
Series K8P electronic proportional micro regulators have evolved from our Series K8 mini-solenoid valves. Series K8P regulators guarantee excellent pressure regulation, fast response times, self-regulation and low energy consumption. Series K8P is a high performance proportional pressure regulator which is suitable for use in all applications where high precision, quick response times and low consumption are required. The K8P regulator adjusts the outlet pressure through the operation of two K8 monostable valves according to the inlet signal and to the retroactivity of the internal pressure sensor. A self-adjusting function has been integrated into the regulator control algorithm to guarantee the highest levels of performance apart from the volume connected.
Series K8DV directly operated solenoid valves with fluid separation membrane
The K8DV solenoid valve was born to meet all the demands to shut off aggressive or heat sensitive fluids. Thanks to a fluid separation membrane, the fluid is isolated from all internal metal parts of the solenoid valve and avoids heating, even if minimum, generated by the solenoid positioned above. To choose the most suitable model for a specific application, check the chemical compatibility of the medium to control with the available materials of body and seals.
Very compact design and reduced weight
High flow performances
Very low internal volume
Suitable to be applied in medical equipment and analytical instruments
Series PDV diaphragm isolation valves directly operated
Series PDV directly operated solenoid valve is available with several nominal diameters and in three different versions according to the electrical connection. Moreover, the fluid separation membrane protects the medium from extreme changes of temperature due to heating of the solenoid. To choose the most suitable model for a specific application, check the chemical compatibility of the medium with the available materials of body and seals.
Suitable to be used with neutral or aggressive fluids
Suitable for specific applications on medical and analytical equipment or instruments
Product category: Microfluidics, Other components, modules, OEM equipment
Specials & Customised Solutions
Camozzi has broad experience in the development of a range of customised solutions for the control of liquid and gaseous fluids. These solutions combine modern and functional design with high performance to produce miniaturised solenoid valves and other components as well as PWM (pulse width modulation) and PCM (pulse code modulation) controls, separating diaphragms for controlling aggressive fluids, latch systems and systems with integrated sensors that control pressure, flow and position.
Integrated system to introduce air into the system
Disinfection / sanitation process
Integrated solution specific for the mixing and control of oxygen-air
Integrated solution specific for the mixing of air - oxygen
Product category: Other components, modules, OEM equipment
OX1 fittings for applications of medical gases
OX1 fittings are designed for the Life Science market, particularly for medical and analytical applications. Equipment manufacturers of Ventilators, Anaesthesia devices, Oxygen Concentrators, Mass Spectrometry or Bio Medical analysers have qualified the Series OX1 fittings for many years.
OX1 Products Cleanliness level: Non volatile residue equal to or less than 550 mg/m2
Product category: Other components, modules, OEM equipment
Series DB Fluid & Dental Multichannel Manifold
The Series DB is a modular and compact solution, optimising pneumatic, hydraulic and electrical connections — reducing installation times on machines operating in the industrial and life sciences sectors. The concept behind the manifold gives multiple modules maximum configuration versatility, combining miniature solenoid on-off valves and proportional control valves. Each single manifold is configurable in several ways to match the operating requirements of each handpiece installed on the dental units. For example, with the proper configuration, it is possible to optimise the connections of the air and water tubing used for the operation with turbines, micromotors, scalers and syringes.
Series N filters, coalescing filters and actived carbon filters
Series N filters are available with G1/8 and G1/4 gas ports. The models are available with 3 different filtering elements: 25, 5, 0.01µm and actived carbon. The version with semi-automatic manual drain is equipped with a transparent bowl that makes the monitoring of the condensate level very easy. The version with metal bowl is particularly suitable for applications subject to impacts or in the presence of aggressive agents that could damage the PA12 bowl.
Available with: transparent PA12 bowl or nickelplated brass bowl for the small version (N1)
Quality of delivered air according to ISO 8573-1:2010 from Class 7.8.4 to Class 1.7.1
Open Frame Controller - Modular Proportional Regulator
The new OPEN FRAME CONTROLLER system is a platform for providing closed loop control of flow,pressure and position and is suitable for Industry 4.0 applications. The system is composed of two base modules: Master and Slave that individually may be combined following the application needs. It can be easily configured to meet specific application needs, to provide the most efficient, turnkey solutions, thus reducing assembly times and system complexity. The different Master and Slave modules can be combined and driven through simple serial communications, making the control of complex applications easier. Typical applications could include the mixingof different gases, piloting different pressuresin different parts of the machine, or the positioning of a pneumatic cylinder through a single control signal.
Closed loop control of flow, pressure and position
Precise fluid control, even at high flow rates. The angle seat valve Series ASX is a pneumatically-operated valve designed to control steam, liquids, gas and fluids that contain suspended solid particulate matter. The angled mount and design of the valve enable a high and constant flow, whilst ensuring a low pressure drop. Made entirely of stainless steel, this valve is the ideal solution for many industrial applications, even when besides high flow rates, the control of viscous fluids is also required. It is available in a range of different versions as well as special models to be installed in applications with flow direction under the poppet, in order to prevent or reduce the water-hammer effect when closing the valve.
High flow rate
Low fluid resistance
Versions avilable that prevent water-hammer effects
Series CGPT self-centering parallel grippers with T-guide
Thanks to the use of a high performing and precise force transmission system, the Series CGPT grippers are able to provide high gripping forces while guaranteeing a very high repeatability. The wide range of sizes available allows you to find the best solution for any need of movement. The grippers are supplied with centering bushes (tolerance H8) which, once positioned on the body and/or on the jaws, are able to guarantee, during maintenance, a high interchangeability of the gripper and of the extensions.
Robust, compact and light design
High closing/opening forces
Fixing from the top, from below and from the side
Supply on the side or on the bottom (even without using tubes)
High closing and opening repeatability
High interchangeability (centering bushes)
Position detection thanks to the use of magnetic proximity switches.
In compliance with ROHS directive
PTFE, Silicone and Copper free
High resistance to external loads thanks to the T-guide
Variants available for use in ATEX zones and for high temperatures
The Series 63 pneumatic cylinders have been developed to guarantee high performance and versatility. Thanks to a new system of adjustable pneumatic cushioning, the cylinders can always guarantee the best regulation whilst significantly reducing noise caused by the impact of the piston on the end block. Besides the standard version, which can be used in many sectors, specific solutions have been developed for applications such as food processing, agriculture, in tensioning, dosing systems and dancer arms for winding applications. There are also versions for demanding application environments, capable of withstanding extreme temperatures, corrosive atmospheres etc.
Product category: Laboratory automation, Linear technology
Series 5E electromechanical axis
Series 5E axes are mechanical linear actuators in which the rotary movement generated by a motor is converted into a linear movement by means of a toothed belt. The Series 5E, available in 3 sizes, 50, 65 and 80, is realized by means of a special self-supporting square profile, in which the components have been completely integrated, assuring compactness and light weight. The presence of a recirculating ball guide grants high stiffness and resistance to external loads.
Multiposition system with transmission of the movement with toothed belt
Suitable for high dynamics
Possibility to connect the motor on 4 sides
Large range of motor interfaces
Possibility to use magnetic proximity switches and/or inductive sensors
The external design, the choice of materials and the search for miniaturization makes Series RPGB a compact and lightweight solution. The D model is provided with a finger having a slot for the installation of a magnetic sensor which is able to detect the grip of the piece. Its technical features ensure a high gripping force and make this gripper particularly suitable in the removal of injection molded items. The surface treatments on each metallic part make this series very wear resistant.
Suitable for plastic injection molding sector
Easy to install
Compact and lightweight
Models RPGB-08-D and RPGB12-D are supplied with sensor CSD-D-364 already mounted
Discover our new Fluid Control catalogue! Our engineers dealing with fluid control applications are able to offer highly engineered and specialised components and solutions for the main industrial sectors as well as for more delicate applications in the medical and analytical fields. Our range of Camozzi products includes both single components, such as valves and solenoid valves, proportional valves, servo-valves, pressure and flow regulators, fittings and components for air treatment, as well as complete customised systems.
Discover our Webinar: “Systems & Components for Healthcare Industry contributing in the fight against Covid-19”. Douglas Lenihan, Business Development Manager Life Science, and Cristian Galbiati, the Princeton University professor, will cover the success case of the MVM Ventilator.
Founded in 1964, Camozzi Automation is a global leader in the design and production of motion and fluid control components, systems and technologies for Industrial Automation, Transportation and Life Science Industries. For the Life Science sector, our Fluid Control components offer innovative and reliable miniature solenoid valves, proportional regulators and solutions with separating diaphragm, customized solutions - for controlling aggressive fluids, latch systems and systems with integrated sensors that control pressure, flow and position.
Medical Devices - Ventilators & Anaesthesia, Dialysis machines, Presso & Vacuumtherapy, Drug infusion, Dental unit, Autoclave, Oxygen concentrators, Hematology, Biotechnologies, Clinical diagnostics
In order to guarantee the best quality in all production phases, Camozzi has created controlled atmosphere environments and an ISO 7 cleanroom for the assembly of products and solutions that require extreme cleanliness and the elimination of all organic and/or inorganic contaminants. Ultrasonic cleaning and inspection equipment that makes use of UV blacklighting enables us to supply components that can be used with aggressive liquids and oxidizing gases like oxygen.