Sarah Jonek/HSBI
Diabetic foot syndrome: Help through orthosis with sensors
12.09.2024
A sensor-equipped orthosis is being developed at Bielefeld University of Applied Sciences to improve patient self-management during the treatment of diabetic foot syndrome.
halfpoint
Diabetes: Sensor sole warns of foot ulcers
07.05.2024
People with long-term diabetes often struggle with pressure sores and chronic wounds on their feet. These occur due to circulatory and sensory disorders. Careful monitoring of one's own feet is necessary for prevention. A newly developed insole with sensors, in combination with telemedicine, is intended to prevent the formation of foot ulcers.
Advancing surgical precision: ROSA shoulder system
18.03.2024
Zimmer Biomet, a leading medical technology company, has achieved a significant milestone with the FDA clearance of its ROSA Shoulder System for robotic-assisted shoulder replacement surgery. This innovation marks the world's first robotic surgery system specifically designed for shoulder replacement procedures.
ionadidishvili
Hand prostheses: Artificial intelligence makes gripping more intuitive
15.12.2023
A better understanding of muscle activity patterns in the forearm supports a more intuitive and natural control of artificial limbs. This requires a network of 128 sensors and artificial intelligence based techniques.
NTU Singapore
Singapore: advancing 3D printing in healthcare with joint R&D lab
11.12.2023
Singapore General Hospital (SGH) patients are expected to benefit from healthcare innovations, such as customised medical devices and implants, under a collaboration with Nanyang Technological University, Singapore (NTU Singapore) to set up a Joint Research & Development Laboratory in additive manufacturing (AM), also known as 3D printing.
Fraunhofer CMI
Inspired by mussels: printable adhesives for tissues and bones
08.12.2023
Titanium hip implants do not last forever — they gradually loosen, sooner or later losing their hold on the bone as it recedes over time. Researchers at the Fraunhofer IAP have been working alongside the Fraunhofer IGB and the Fraunhofer CMI to develop a tissue adhesive that can help avoid early replacement of prostheses in the future.
Empa
Surgery and imaging: mapping the meniscus
05.12.2023
A non-trivial player in the anatomical orchestra of the compound joint is the meniscus cartilage. Empa researchers are now creating a "3D map" of the precious cartilage.
Andreas Heddergott / TUM
GyroTrainer with AI: Individual back training machine
29.11.2023
The GyroTrainer is an intelligent training device that resembles a balance board. It uses artificial intelligence to adjust the difficulty level to the individual patient’s current ability.
BellaSeno
Bioactive composite supports healing of broken bones
09.11.2023
A broken bone failing to heal represents an enormous burden for patients. Fraunhofer researchers have worked alongside partners to develop a composite material to be used in the treatment of such non-union cases. The resulting implant is designed to significantly improve treatment success rates and speed up the healing process.
Courtesy of Faraz Faruqi and Stefanie Mueller
AI-driven tool to personalize 3D-printable models
20.09.2023
MIT researchers developed a generative-AI-driven tool that enables the user to add custom design elements to 3D models without compromising the functionality of the fabricated objects. A designer could utilize this tool, called Style2Fab, to personalize 3D models of objects using only natural language prompts to describe their desired design.
KTU
AI-based system will help people after stroke
01.08.2023
The joint study by Rytis Maskeliūnas, a researcher at Kaunas University of Technology, Faculty of Informatics (KTU IF), and Lithuanian researchers is focused on creating an artificial intelligence (AI)-based system that aims to facilitate the rehabilitation process.
Marius Maasewerd, HAWK
Orthobionics degree program qualifies specialists for orthopedics
01.08.2023
Starting from the winter semester of 2023, the Orthobionics program will launch a distinctive bachelor's degree. Geared towards the requirements of the orthopedic technology industry, they will be adept in independently providing care with modern orthoses and prostheses.
Chalmers University of Technology
Bionic hand: surgical and engineering innovations enable unprecedented control
21.07.2023
For the first time, a person with an arm amputation can manipulate each finger of a bionic hand as if it was his own. Thanks to revolutionary surgical and engineering advancements that seamlessly merge humans with machines, this breakthrough offers new hope and possibilities for people with amputations worldwide.
microgen
Soft orthotics: creating the perfect fit with a 3D scanner
08.05.2023
Soft textile orthoses are used in the treatment of certain medical conditions. Making these custom devices by hand is difficult, time-consuming, and susceptible to human error. A research project has developed a digital platform designed to simplify the production of soft orthoses.
Marco Binelli / ETH Zürich
3D-printed insoles measure sole pressure directly in the shoe
24.03.2023
Researchers at ETH Zurich, Empa and EPFL are developing a 3D-printed insole with integrated sensors that allows the pressure of the sole to be measured in the shoe and thus during any activity.
Wingborg/University of Gothenburg
Fewer surgically treated ankle fractures with clear-cut treatment routine
30.01.2023
It has been shown that the percentage of ankle fractures that undergo surgery could be substantially reduced, from more than 30 per cent to 10 in the most common type of fracture. The key is a clear-cut treatment routine that benefits both patients and caregivers, according to a doctoral dissertation at the University of Gothenburg.
Imperial College London
Affordable device for fixing broken bones piloted in Gaza, Sri Lanka and Ukraine
20.01.2023
Imperial researchers have developed a low-cost, easy-to-manufacture stabiliser for broken bones to help in regions where such devices are expensive or in short supply and people sometimes resort to homemade options.
Osaka Metropolitan University
Total knee arthroplasty: Faster knee for better walking
19.01.2023
Osaka Metropolitan University scientists have revealed that knee extension velocity while seated is a stronger predictor of walking performance than muscle strength in elderly patients after their total knee arthroplasty (TKA) surgery.
wutzkoh
Older knee replacements as good as newer models, study shows
16.01.2023
Older knee replacement designs are just as effective as newer models – according to new research from the Norfolk and Norwich University Hospital and University of East Anglia.
StudioVK
A prosthetic limb that can read my mind
04.01.2023
A team at FAU is investigating how intelligent prostheses can be improved. The idea is that interactive artificial intelligence will help the prostheses to recognize human intent better, to register their surroundings and to continue to develop and improve over time.
Markus Bernards
Treatment for back pain: 84 percent increase in success rate
20.10.2022
Multimodal therapies should be promoted on a larger scale in the German healthcare system, in line with the National Disease Management Guidelines.
3Digity
Finger orthosis: Custom fit with 3D printing
10.05.2022
Following an injury or surgery, orthotics are key components of the recovery and rehabilitation process. The University spin-off 3Digity designs 3D-printed customized finger orthoses to foster rehabilitation as custom orthotics can drastically speed up the recovery process.
Digitalization in orthopedic technology – A craft is changing
22.11.2021
Orthopedic auxiliary means are mostly still produced in manual labor today. But orthopedic technology is also trying out new ways by using tools like 3D scanners, digital models and 3D printing. Nadja Singer from Ottobock explains in our video interview how this changes the production of auxiliary means.
Sports medicine & physiotherapy: from training equipment to playful rehabilitation
16.11.2021
Sports medicine and physiotherapy involve many different types of equipment - from cardiovascular training to joint mobilization and playful rehabilitation. You can get an insight into the different products in our photo gallery from MEDICA 2021.
Machine Vision – The new navigation for spine surgery
15.09.2021
Precise, extremely quick and accurate – a new kind of navigation device in the OR uses a highly-developed camera technology to guide the surgeon through difficult procedures – directly in the OR. Prof. Ulf Liljenqvist, Chief Medical Director of the Clinic for Spinal Surgery at the St. Franziskus Hospital Münster, talks about his experiences in using the device.
Daniel Hutchinson
Fracture setting method could replace metal plates
02.07.2021
A new biocompatible polymer-based composite material could soon replace metal plates in treating difficult and unstable fractures. Developed at KTH Royal Institute of Technology in Stockholm, the newly-developed material is as strong as dental composites yet non-toxic.
Digital orthopedic technology: scan, customize, print
01.07.2021
When auxiliary means like orthoses or prostheses do not come from the shelf, but are adapted to the wearer, this means true crafting: In the past, a plaster mold of a body part had to be made as a template to create an individual aid from it step by step. Fortunately, we have come a long way until today.
Getting from 3D scan to 3D print: computer-aided prostheses and orthoses
01.07.2021
Orthopedic technology is a true craft: That's because prostheses and orthoses are rarely off-the-shelf products. Orthopedic technicians must typically use different materials to custom create and fit the devices. Many of these processes are manual. For several years now, 3D scanning and 3D printing have modernized the industry thanks to digital design freedom and flexible production.
Luxinergy/kerkoc
Customized and freshly printed: 3D printing in orthopedics
01.07.2021
Creating custom-made medical devices to target individual patient needs: that is the core function and primary objective of orthopedics. Using 3D printers for this will make sense in the future. Luxinergy is an innovative Austrian technology company that specializes in the development of biocompatible resins and large-format 3D printers.
Orthopedic technology: 3D scanners change the industry
01.07.2021
Orthopedic technology involves taking a measurement of a specific body part and then creating a medical device, be it prosthesis or orthosis, that fits. While optical scanners are already used for some of these measurements, others are still performed through manual labor and craft to create molds of the body. 3D scanners are changing this.
Smart implant – Healing fractures autonomously with smart materials
07.06.2021
Lower leg fractures put a great strain on patients due to their long healing process. In the future, an intelligent implant could control how the bone grows together again and thus optimize the healing process. In our video, you can learn from the developers at Saarland University how this works and what role artificial intelligence plays here.
Hip replacement: virtual surgical training with haptic technology
01.04.2021
Surgeons have only limited options to practice surgical techniques before they enter the operating room. The implantation of an endoprosthesis requires extensive practical training since it necessitates strength and utmost precision. The "Dynamic HIPS" project develops a virtual reality hip implant simulator that provides realistic haptic feedback.
EXXETA AG
Gamification: facilitating a gradual return-to-play
08.06.2020
Professional athletes depend on a speedy recovery from sports injuries or surgery because their livelihood depends on their physical fitness. Returning to competition too soon after injury can have negative health consequences. Standard tests are now combined with virtual reality to determine the optimal time to return to play.
PantherMedia / Viktor Cap
Sports medicine software: Monitoring at the push of a button
22.05.2020
Athletes not only have to be fit and stay in shape, but they also have to achieve peak performance, especially when they get ready for athletic events. Optimized and individualized performance training requires data from external laboratories and institutes. The [i/med] Sports platform from DORNER Health IT Solutions provides a complete workflow − from anamnesis to diagnostic report.
German Medical Award
German Medical Award 2019 celebrates the future of (patient) care
22.08.2019
The German Medical Award will take place on November 18, 2019, as part of the MEDICA trade fair in Düsseldorf. The ceremony emphasizes the commitment to excellence in cutting-edge care for patients. Doctors, clinical centers and companies in the medical and healthcare industry can demonstrate their achievements in medicine and management in hopes of receiving the coveted award.
Sports medicine: Neuromuscular training for optimal performance
20.08.2019
Movement, strength and coordination - after injuries as well as in healthy athletes, these three components must be intact for movements to run smoothly. At the Beta Klinik in Bonn, Dr. Markus Klingenberg, a specialist in orthopaedics, trauma surgery and sports medicine, offers neuromuscular training with a playful character that can be adapted to the patient's needs.
Performance diagnostics: success in sports – testing the limits of performance
01.07.2019
Stationary or mobile - competitive athletes rely on regular health assessments. They must deliver peak performance and be physically fit during competitions. But when do they reach their physical limits? Are there any devices that provide information, no matter where the test subject is located?
Sports medicine - performance values in best health
01.07.2019
Those who integrate physical activities into their own lifestyle live healthier and more balanced. But where are the physical limits? Can health status measurements also be carried out on the road? Discover more about how sports medical examinations contribute to maintain performance and minimize health risks in our Topic of the Month.
Rehab with a robot – robot-assisted therapy in neurology
03.06.2019
It takes consistent repetitions if rehab patients want to relearn skills after surviving a stroke. This requires extreme effort. The industrial sector uses robots to perform repetitive tasks or handle jobs that require strength. What has been a fixture in factories for decades is now also making its way into rehabilitation facilities.
panthermedia.net/ monstArrr
Orthopedic implant: More comfortable thanks to full weight-bearing capacity
08.03.2019
Orthopedic implants – they are a necessity when it comes to congenital or acquired limb length discrepancies. However, full weight-bearing during the limb lengthening process is not feasible with previous implant models. For the first time, the 3D Surgery division at the Medical Center of the University of Munich has succeeded in using an implant that facilitates immediate weight-bearing.
Endoprostheses - Ultrasound to detect loosening?
27.02.2019
Many patients suffering from arthrosis or other kinds of damage in the hip joint need an endoprosthesis at some point. However, this prosthesis can loosen again after some time, so that it must be replaced. In order to delay this replacement surgery for as long as possible, the TH Mittelhessen University of Applied Sciences develops a new diagnostic method.