05.09.2024
Researchers at the University of Colorado Boulder, in collaboration with the University of Pennsylvania, have developed an advanced 3D printing method to create materials that support human tissue effectively. This new approach could lead to significant improvements in personalized medical implants and tissue repair.02.08.2024
Cardiology is increasingly transitioning from traditional metal stents to self-dissolving stents for the treatment of coronary heart disease. These new magnesium stents have the potential to improve the treatment and outcomes for a large patient population.05.06.2024
Dr. Melissa Grunlan, a professor in the Department of Biomedical Engineering at Texas A&M University, is developing synthetic plugs to treat chronic knee pain and disabilities, offering an alternative to total knee replacements. This project is funded by the National Institute of Arthritis and Musculoskeletal and Skin Diseases, a part of the National Institutes of Health.31.05.2024
At the forefront of cardiac care, the Department of Cardiology and Angiology at Hannover Medical School (MHH) has introduced a novel treatment method using self-dissolving stents.19.04.2024
Neurostimulators play an important role in the treatment of chronic pain conditions. They use targeted electrical impulses to modulate pain signals. The Inceptiv™ neurostimulator from Medtronic is an example of a treatment solution for chronic neuropathic pain. It can offer sufferers a significant improvement in their quality of life.15.04.2024
A breakthrough in reconstructive surgery may be on the horizon, as researchers develop a 3D-printed skin that integrates hair follicle precursors, leveraging adipose tissue for more natural results.02.04.2024
With "iSoldering", the Particles Biology Interactions Laboratory at the Swiss Federal Laboratories for Materials Science and Technology (Empa) in St. Gallen and the Nanoparticle Systems Engineering Laboratory at ETH Zurich have developed a method that does not require surgical sutures or synthetic adhesives. Instead, nanoparticles and light enable secure wound closure.07.02.2024
Metabolic dysfunction-associated steatohepatitis (MASH), previously known as nonalcoholic steatohepatitis (NASH), is a liver disease characterized by inflammation and scarring, reaching epidemic proportions with an estimated 1.5 percent to 6.5 percent of U.S. adults affected.06.02.2024
Researchers at the University of Jyväskylä in Finland are pioneering the development of antiviral surfaces to mitigate the spread of infectious diseases, particularly focusing on coronaviruses.18.12.2023
For the first time ever, wireless millirobots navigated a narrow blood vessel both along and against arterial flow. Researchers from the University of Twente and Radboudumc inserted the screw-shaped robots in a detached aorta with kidneys where they controlled them using a robotically controlled rotating magnet.30.11.2023
Over the next five years, the ERC will provide two million euro of funding for the development of a new class of electronic components that consist almost entirely of water and could make the interface between biological tissue and machine seamless.15.11.2023
Avery Dennison, a global powerhouse in materials science, is advancing the field of medical adhesives, both for wound and surgical care as well as for wearables. With a multidisciplinary team and a dedication to addressing current industry challenges, they deliver solutions that not only meet the practical needs of medical applications but also enhance the comfort for patients.09.11.2023
A broken bone failing to heal represents an enormous burden for patients. Fraunhofer researchers have worked alongside partners to develop a composite material to be used in the treatment of such non-union cases. The resulting implant is designed to significantly improve treatment success rates and speed up the healing process.16.10.2023
During fracture treatment, screws are frequently used to join bone fragments. Traditional metal screws can necessitate additional surgeries during follow-up treatment, extending the healing process. Shark Screw® bone screw, crafted from human tissue, presents significant benefits in this context.06.09.2023
Linnaeus University is partnering with industry and healthcare to develop advanced biosensors, investing SEK 35 million in a project aimed at faster and cost-effective diagnoses of aggressive lung cancer, viral, and bacterial diseases, potentially enabling self-testing at home.20.07.2023
Dr. Jasmina Gačanin, postdoctoral researcher at the Max Planck Institute for Polymer Research in the department of Prof. Dr. Tanja Weil, has been appointed as a “Peretti-Schmucker Fellow”.09.06.2023
For Qun Ren, every minute counts. The Empa researcher and her team are currently developing a diagnostic procedure that can detect life-threatening blood poisoning caused by staphylococcus bacteria rapidly. This is because staphylococcal sepsis is fatal in up to 40 percent of the cases.02.06.2023
Using a newly developed method for the efficient and cost-effective production of biocompatible microfibres, the production of autologous skin and organs can be significantly accelerated. Responsible for the development are Carole Planchette and her team from TU Graz.12.05.2023
Materials made of spider silk can be specifically modified or processed in such a way that living cells of a certain type adhere to them, grow and proliferate. This has been discovered by researchers at the University of Bayreuth under the direction of Prof. Dr. Thomas Scheibel.10.05.2023
Scientists at the Fraunhofer Institute for Biomedical Engineering IBMT have been working with international partners to develop a technology platform to help relieve the symptoms of muscle tremors.03.02.2022
The waiting time for a donor organ is long nowadays since the need for organs vastly exceeds their availability. But we have possibilities to improve the situation and help as many people as possible to survive despite organ failure: Some organ functions can already be substituted by technology. But medicine is also researching ways to make more organs available for transplant.03.01.2022
The shortage of donor organs is a major global issue. An aging population, a reluctance towards organ donation, and logistical challenges related to organ shipping play an important role in this setting. Machine perfusion can be a way to expand and preserve the donor pool for eligible transplant recipients.03.01.2022
Extracorporeal membrane oxygenation (ECMO) is often a last resort treatment for patients with acute respiratory failure. The method uses an external pump to circulate blood through an artificial lung back into the bloodstream. However, the use of ECMO for long-term support is not possible for patients with chronic respiratory failure.01.12.2021
We can replace certain functions of the body with implants nowadays, others we cannot. When it comes to the human senses, we are still quite at the beginning. The technologies and materials we can use are way to coarse compared to our nervous system. But implants can also help us to maintain senses.01.09.2021
Drawing inspiration from nature, a team of international scientists have invented a smart device for personalized skin care modeled after the male diving beetle. This tool collects and monitors body fluids while sticking to the skin’s surface, paving the way for more accurate diagnostics and treatment for skin diseases and conditions like acne.31.08.2021
Scientists use the adhesive capabilities of mussels as a model for optimizing hydrogels’ mechanical properties.29.07.2021
An MSU-led team is developing an inexpensive biopolymer dressing to heal injuries like diabetic foot ulcers that affect millions of patients all over the world.02.07.2021
A new biocompatible polymer-based composite material could soon replace metal plates in treating difficult and unstable fractures. Developed at KTH Royal Institute of Technology in Stockholm, the newly-developed material is as strong as dental composites yet non-toxic.27.01.2021
Drug research and artificial skin replacement - these are the areas in which tissue engineering and bioprinting are already used today. What else could be possible in the future? We asked Dr. Nadine Nottrodt from Fraunhofer ILT and Prof. Sabine Neuß-Stein from RWTH Aachen University Hospital!01.12.2020
How do cells react to certain drugs? And how exactly is new tissue created? This can be analyzed by using bioprinting to embed cells in fine frameworks. However, current methods are often imprecise or too slow to process cells before they are damaged. At the TU Vienna, a high-resolution bioprinting process has now been developed using a new bio-ink.01.12.2020
It aims at the production of test systems for drug research and gives patients on the waiting lists for donor organs hope: bioprinting. Thereby biologically functional tissues are printed. But how does that actually work? What are the different bioprinting methods? And can entire organs be printed with it? These and other questions are examined in our Topic of the Month.01.12.2020
Implants, prostheses and various other components made of plastic, metal or ceramics are already being produced by additive manufacturing. But skin, blood vessels or entire organs from the printer – is that possible? For years now, intensive research has been underway into the production of biologically functional tissue using printing processes. Some things are already possible with bioprinting.01.12.2020
The big hope of bioprinting is to someday be able to print whole human organs. So far, the process has been limited to testing platforms such as organs-on-a-chip. That's because the actual printing process already poses challenges. Scientists need suitable printing materials that ensure the cell's survival as it undergoes the procedure. The Fraunhofer IGB is researching and analyzing this aspect.02.11.2020
Whether it is hospitals or care homes - the right hygiene tools are crucial for process efficiency. These products can be composed of a wide variety of materials. NORAFIN offers a sustainable solution with products made from nonwoven fabric.22.09.2020
Patients who receive a prosthesis after the amputation of a limb often have to train for weeks or months until they can control the technology and use it in everyday life without problems. At the Medical University of Vienna, the world's first bionic prosthesis has now been developed that has a closed control loop and enables immediate, intuitive use.03.02.2020
Regenerative medicine aims to repair the human body after injuries, accidents or major cancer surgery. Unfortunately, we are still not at a stage where this process can achieve optimal results for every conceivable situation. Having said that, various new methods are on the cusp of breakthrough.03.02.2020
Collagen is the stuff that holds our bodies together and that houses our cells. In regenerative medicine, it is also the stuff that can be applied to wounds to support healing. However, collagen from animal or human sources has some drawbacks for today’s medicine. This is where rhCollagen from the Israeli company CollPlant comes into play.01.01.2020
Today, people tend to live longer, while an increasing number of patients suffer from osteoarthritis. Even younger generations are now at a higher risk of getting osteoarthritis due to the frequent use of mobile devices. The EU research project APRICOT aims to develop a novel type of implant for the treatment of osteoarthritis of the hands – helping patients heal themselves.01.01.2020
When natural joints lose their ability to function, they can be completely or partially replaced by artificial joints, also called endoprostheses. Endoprostheses must be of a certain quality, as they should remain in the body as long as possible. In addition to some risks, endoprostheses can also contribute to a mobile and carefree life for young and old.