MEDICA: Therapy
Menu

Image: Smiling man with blue shirt, short gray hair and beard holding a foot orthosis - Prof. Martin Kohlhase; Copyright: Sarah Jonek/HSBI

Sarah Jonek/HSBI

Diabetic foot syndrome: Help through orthosis with sensors

12.09.2024

A sensor-equipped orthosis is being developed at Bielefeld University of Applied Sciences to improve patient self-management during the treatment of diabetic foot syndrome.
Read more
Image: The bare feet of a man with dark discoloration and ulcers; Copyright: halfpoint

halfpoint

Diabetes: Sensor sole warns of foot ulcers

07.05.2024

People with long-term diabetes often struggle with pressure sores and chronic wounds on their feet. These occur due to circulatory and sensory disorders. Careful monitoring of one's own feet is necessary for prevention. A newly developed insole with sensors, in combination with telemedicine, is intended to prevent the formation of foot ulcers.
Read more
Image: The picture shows a woman from behind who has a scar on her right shoulder. The background is neutral.

Advancing surgical precision: ROSA shoulder system

18.03.2024

Zimmer Biomet, a leading medical technology company, has achieved a significant milestone with the FDA clearance of its ROSA Shoulder System for robotic-assisted shoulder replacement surgery. This innovation marks the world's first robotic surgery system specifically designed for shoulder replacement procedures.
Read more
Image: Biomechanical carbon hand prosthesis for disabled people on the table in the office, another white prosthesis in the background; Copyright: ionadidishvili

ionadidishvili

Hand prostheses: Artificial intelligence makes gripping more intuitive

15.12.2023

A better understanding of muscle activity patterns in the forearm supports a more intuitive and natural control of artificial limbs. This requires a network of 128 sensors and artificial intelligence based techniques.
Read more
Image: Close up: orthopaedic implant made from titanium-tantalum; Copyright: NTU Singapore

NTU Singapore

Singapore: advancing 3D printing in healthcare with joint R&D lab

11.12.2023

Singapore General Hospital (SGH) patients are expected to benefit from healthcare innovations, such as customised medical devices and implants, under a collaboration with Nanyang Technological University, Singapore (NTU Singapore) to set up a Joint Research & Development Laboratory in additive manufacturing (AM), also known as 3D printing.
Read more
Image: A printer applies the dopamine-based tissue adhesive to the three-dimensional titanium shaft of a hip joint; Copyright: Fraunhofer CMI

Fraunhofer CMI

Inspired by mussels: printable adhesives for tissues and bones

08.12.2023

Titanium hip implants do not last forever — they gradually loosen, sooner or later losing their hold on the bone as it recedes over time. Researchers at the Fraunhofer IAP have been working alongside the Fraunhofer IGB and the Fraunhofer CMI to develop a tissue adhesive that can help avoid early replacement of prostheses in the future.
Read more
Image: Empa researcher Federica Orellana works with a micro-computed tomography to analyze tissue samples of meniscus; Copyright: Empa

Empa

Surgery and imaging: mapping the meniscus

05.12.2023

A non-trivial player in the anatomical orchestra of the compound joint is the meniscus cartilage. Empa researchers are now creating a "3D map" of the precious cartilage.
Read more
Image: Kim Peper (in the middle) stands on the GyroTrainer board. Elisabeth Jensen (front left) determines the individual stiffness, right: Jan Lang; Copyright: Andreas Heddergott / TUM

Andreas Heddergott / TUM

GyroTrainer with AI: Individual back training machine

29.11.2023

The GyroTrainer is an intelligent training device that resembles a balance board. It uses artificial intelligence to adjust the difficulty level to the individual patient’s current ability.
Read more
Image: At the pilot plant, a 3D printer builds the scaffold from the composite material; Copyright: BellaSeno

BellaSeno

Bioactive composite supports healing of broken bones

09.11.2023

A broken bone failing to heal represents an enormous burden for patients. Fraunhofer researchers have worked alongside partners to develop a composite material to be used in the treatment of such non-union cases. The resulting implant is designed to significantly improve treatment success rates and speed up the healing process.
Read more
Image: A blue 3d printed wrist splint on a hand; Copyright: Courtesy of Faraz Faruqi and Stefanie Mueller

Courtesy of Faraz Faruqi and Stefanie Mueller

AI-driven tool to personalize 3D-printable models

20.09.2023

MIT researchers developed a generative-AI-driven tool that enables the user to add custom design elements to 3D models without compromising the functionality of the fabricated objects. A designer could utilize this tool, called Style2Fab, to personalize 3D models of objects using only natural language prompts to describe their desired design.
Read more
Image: A man holds a prosthetic leg while a woman is screwing in it; Copyright: Marius Maasewerd, HAWK

Marius Maasewerd, HAWK

Orthobionics degree program qualifies specialists for orthopedics

01.08.2023

Starting from the winter semester of 2023, the Orthobionics program will launch a distinctive bachelor's degree. Geared towards the requirements of the orthopedic technology industry, they will be adept in independently providing care with modern orthoses and prostheses.
Read more
Image: A device for monitoring arm movements, part of the post-stroke rehabilitation system; Copyright: KTU

KTU

AI-based system will help people after stroke

01.08.2023

The joint study by Rytis Maskeliūnas, a researcher at Kaunas University of Technology, Faculty of Informatics (KTU IF), and Lithuanian researchers is focused on creating an artificial intelligence (AI)-based system that aims to facilitate the rehabilitation process.
Read more
Image: Patient wearing a prosthetic arm directly attached to the skeleton and neuromuscular system; Copyright: Chalmers University of Technology

Chalmers University of Technology

Bionic hand: surgical and engineering innovations enable unprecedented control

21.07.2023

For the first time, a person with an arm amputation can manipulate each finger of a bionic hand as if it was his own. Thanks to revolutionary surgical and engineering advancements that seamlessly merge humans with machines, this breakthrough offers new hope and possibilities for people with amputations worldwide.
Read more
Image: Adolescent girl is wearing sensors on her back for motion tracking; Copyright: microgen

microgen

Soft orthotics: creating the perfect fit with a 3D scanner

08.05.2023

Soft textile orthoses are used in the treatment of certain medical conditions. Making these custom devices by hand is difficult, time-consuming, and susceptible to human error. A research project has developed a digital platform designed to simplify the production of soft orthoses.
Read more
Image: An insole is made on a 3D printer; Copyright: Marco Binelli / ETH Zürich

Marco Binelli / ETH Zürich

3D-printed insoles measure sole pressure directly in the shoe

24.03.2023

Researchers at ETH Zurich, Empa and EPFL are developing a 3D-printed insole with integrated sensors that allows the pressure of the sole to be measured in the shoe and thus during any activity.
Read more
Image: Professional portrait photo by Emilia Möller Rydberg; Copyright: Wingborg/University of Gothenburg

Wingborg/University of Gothenburg

Fewer surgically treated ankle fractures with clear-cut treatment routine

30.01.2023

It has been shown that the percentage of ankle fractures that undergo surgery could be substantially reduced, from more than 30 per cent to 10 in the most common type of fracture. The key is a clear-cut treatment routine that benefits both patients and caregivers, according to a doctoral dissertation at the University of Gothenburg.
Read more
Image: Usability testing of the fixator with a bone; Copyright: Imperial College London

Imperial College London

Affordable device for fixing broken bones piloted in Gaza, Sri Lanka and Ukraine

20.01.2023

Imperial researchers have developed a low-cost, easy-to-manufacture stabiliser for broken bones to help in regions where such devices are expensive or in short supply and people sometimes resort to homemade options.
Read more
Image: A patient is examined and measured for seated knee extension speed, quadriceps strength, knee range of motion, and knee pain; Copyright: Osaka Metropolitan University

Osaka Metropolitan University

Total knee arthroplasty: Faster knee for better walking

19.01.2023

Osaka Metropolitan University scientists have revealed that knee extension velocity while seated is a stronger predictor of walking performance than muscle strength in elderly patients after their total knee arthroplasty (TKA) surgery.
Read more
Image: Physical therapists examine the results of knee surgery. The bandage is removed from the knee; Copyright: wutzkoh

wutzkoh

Older knee replacements as good as newer models, study shows

16.01.2023

Older knee replacement designs are just as effective as newer models – according to new research from the Norfolk and Norwich University Hospital and University of East Anglia.
Read more
Image: A young woman in a white shirt operates her bionic prosthetic arm; Copyright: StudioVK

StudioVK

A prosthetic limb that can read my mind

04.01.2023

A team at FAU is investigating how intelligent prostheses can be improved. The idea is that interactive artificial intelligence will help the prostheses to recognize human intent better, to register their surroundings and to continue to develop and improve over time.
Read more
Image: A man in a white shirt sits on an office chair and holds his back in pain; Copyright: Markus Bernards

Markus Bernards

Treatment for back pain: 84 percent increase in success rate

20.10.2022

Multimodal therapies should be promoted on a larger scale in the German healthcare system, in line with the National Disease Management Guidelines.
Read more
Image: 3D printed finger orthosis from 3Digity; Copyright: 3Digity

3Digity

Finger orthosis: Custom fit with 3D printing

10.05.2022

Following an injury or surgery, orthotics are key components of the recovery and rehabilitation process. The University spin-off 3Digity designs 3D-printed customized finger orthoses to foster rehabilitation as custom orthotics can drastically speed up the recovery process.
Read more
Image: Preview picture of video

Digitalization in orthopedic technology – A craft is changing

22.11.2021

Orthopedic auxiliary means are mostly still produced in manual labor today. But orthopedic technology is also trying out new ways by using tools like 3D scanners, digital models and 3D printing. Nadja Singer from Ottobock explains in our video interview how this changes the production of auxiliary means.
Read more
Image: Platzhalter; Copyright: beta-web/Reck

Sports medicine & physiotherapy: from training equipment to playful rehabilitation

16.11.2021

Sports medicine and physiotherapy involve many different types of equipment - from cardiovascular training to joint mobilization and playful rehabilitation. You can get an insight into the different products in our photo gallery from MEDICA 2021.
Read more
Image: Preview picture of video

Machine Vision – The new navigation for spine surgery

15.09.2021

Precise, extremely quick and accurate – a new kind of navigation device in the OR uses a highly-developed camera technology to guide the surgeon through difficult procedures – directly in the OR. Prof. Ulf Liljenqvist, Chief Medical Director of the Clinic for Spinal Surgery at the St. Franziskus Hospital Münster, talks about his experiences in using the device.
Read more
Image: A skull of a pig whose bones have been set using a white mass; Copyright: Daniel Hutchinson

Daniel Hutchinson

Fracture setting method could replace metal plates

02.07.2021

A new biocompatible polymer-based composite material could soon replace metal plates in treating difficult and unstable fractures. Developed at KTH Royal Institute of Technology in Stockholm, the newly-developed material is as strong as dental composites yet non-toxic.
Read more
Image: A young boy is sitting in front of a computer, looking at a 3D scan of his head; Copyright: Artec 3D

Orthopedic technology: 3D scanners change the industry

01.07.2021

Orthopedic technology involves taking a measurement of a specific body part and then creating a medical device, be it prosthesis or orthosis, that fits. While optical scanners are already used for some of these measurements, others are still performed through manual labor and craft to create molds of the body. 3D scanners are changing this.
Read more
Image: Sheath of a leg prosthesis that gets printed by a 3D printer; Copyright: PantherMedia/Markov81

Digital orthopedic technology: scan, customize, print

01.07.2021

When auxiliary means like orthoses or prostheses do not come from the shelf, but are adapted to the wearer, this means true crafting: In the past, a plaster mold of a body part had to be made as a template to create an individual aid from it step by step. Fortunately, we have come a long way until today.
Read more
Image: a 3D-printed orthosis designed by Luxinergy and kerkoc; Copyright: Luxinery/kerkoc

Luxinergy/kerkoc

Customized and freshly printed: 3D printing in orthopedics

01.07.2021

Creating custom-made medical devices to target individual patient needs: that is the core function and primary objective of orthopedics. Using 3D printers for this will make sense in the future. Luxinergy is an innovative Austrian technology company that specializes in the development of biocompatible resins and large-format 3D printers.
Read more
Image: The foot of a patient is being scanned; Copyright: PantherMedia/Rainer Plendl

Getting from 3D scan to 3D print: computer-aided prostheses and orthoses

01.07.2021

Orthopedic technology is a true craft: That's because prostheses and orthoses are rarely off-the-shelf products. Orthopedic technicians must typically use different materials to custom create and fit the devices. Many of these processes are manual. For several years now, 3D scanning and 3D printing have modernized the industry thanks to digital design freedom and flexible production.
Read more
Image: Preview picture of video

Smart implant – Healing fractures autonomously with smart materials

07.06.2021

Lower leg fractures put a great strain on patients due to their long healing process. In the future, an intelligent implant could control how the bone grows together again and thus optimize the healing process. In our video, you can learn from the developers at Saarland University how this works and what role artificial intelligence plays here.
Read more
Image: A man wearing a VR headset is holding a surgical instrument that is attached to a robotic arm; Copyright: Dynamic HIPS

Hip replacement: virtual surgical training with haptic technology

01.04.2021

Surgeons have only limited options to practice surgical techniques before they enter the operating room. The implantation of an endoprosthesis requires extensive practical training since it necessitates strength and utmost precision. The "Dynamic HIPS" project develops a virtual reality hip implant simulator that provides realistic haptic feedback.
Read more
Image: Person with VR glasses in a room; Copyright: EXXETA AG

EXXETA AG

Gamification: facilitating a gradual return-to-play

08.06.2020

Professional athletes depend on a speedy recovery from sports injuries or surgery because their livelihood depends on their physical fitness. Returning to competition too soon after injury can have negative health consequences. Standard tests are now combined with virtual reality to determine the optimal time to return to play.
Read more
Image: Transmission of medical data of an athlete to a laptop; Copyright: PantherMedia / Viktor Cap

PantherMedia / Viktor Cap

Sports medicine software: Monitoring at the push of a button

22.05.2020

Athletes not only have to be fit and stay in shape, but they also have to achieve peak performance, especially when they get ready for athletic events. Optimized and individualized performance training requires data from external laboratories and institutes. The [i/med] Sports platform from DORNER Health IT Solutions provides a complete workflow − from anamnesis to diagnostic report.
Read more
Image: Participants of the German Medical Award 2018; Copyright: German Medical Award

German Medical Award

German Medical Award 2019 celebrates the future of (patient) care

22.08.2019

The German Medical Award will take place on November 18, 2019, as part of the MEDICA trade fair in Düsseldorf. The ceremony emphasizes the commitment to excellence in cutting-edge care for patients. Doctors, clinical centers and companies in the medical and healthcare industry can demonstrate their achievements in medicine and management in hopes of receiving the coveted award.
Read more
Image: Preview picture of video

Sports medicine: Neuromuscular training for optimal performance

20.08.2019

Movement, strength and coordination - after injuries as well as in healthy athletes, these three components must be intact for movements to run smoothly. At the Beta Klinik in Bonn, Dr. Markus Klingenberg, a specialist in orthopaedics, trauma surgery and sports medicine, offers neuromuscular training with a playful character that can be adapted to the patient's needs.
Read more
Image: Cyclist; Copyright: panthermedia.net/rcaucino

Performance diagnostics: success in sports – testing the limits of performance

01.07.2019

Stationary or mobile - competitive athletes rely on regular health assessments. They must deliver peak performance and be physically fit during competitions. But when do they reach their physical limits? Are there any devices that provide information, no matter where the test subject is located?
Read more
Image: Sports shoes of an athlete; Copyright: panthermedia.net/ Daxiao_Productions

Sports medicine - performance values in best health

01.07.2019

Those who integrate physical activities into their own lifestyle live healthier and more balanced. But where are the physical limits? Can health status measurements also be carried out on the road? Discover more about how sports medical examinations contribute to maintain performance and minimize health risks in our Topic of the Month.
Read more
Image: Boy uses robot arm in front of a monitor with computer game, next to it stands the therapist; Copyright: Helios Klinik Hattingen

Rehab with a robot – robot-assisted therapy in neurology

03.06.2019

It takes consistent repetitions if rehab patients want to relearn skills after surviving a stroke. This requires extreme effort. The industrial sector uses robots to perform repetitive tasks or handle jobs that require strength. What has been a fixture in factories for decades is now also making its way into rehabilitation facilities.
Read more
Image: Leg implants; Copyright: panthermedia.net/ monstArrr

panthermedia.net/ monstArrr

Orthopedic implant: More comfortable thanks to full weight-bearing capacity

08.03.2019

Orthopedic implants – they are a necessity when it comes to congenital or acquired limb length discrepancies. However, full weight-bearing during the limb lengthening process is not feasible with previous implant models. For the first time, the 3D Surgery division at the Medical Center of the University of Munich has succeeded in using an implant that facilitates immediate weight-bearing.
Read more
Image: Preview picture of video

Endoprostheses - Ultrasound to detect loosening?

27.02.2019

Many patients suffering from arthrosis or other kinds of damage in the hip joint need an endoprosthesis at some point. However, this prosthesis can loosen again after some time, so that it must be replaced. In order to delay this replacement surgery for as long as possible, the TH Mittelhessen University of Applied Sciences develops a new diagnostic method.
Read more