29/09/2023A new Dartmouth study in the journal Science Advances suggests that how well people with diabetes manage their blood sugar depends on their experience with the condition and their overall success in controlling their glucose levels, as well as on the season and time of day.
26/09/2023Cure, a healthcare innovation campus in New York City, has opened applications for its Cure Xchange Challenge, a bold initiative to incubate innovations by healthcare start-ups and entrepreneurs across disciplines and sectors to responsibly and equitably use artificial intelligence (AI) in health.
19/09/2023Manufacturing high-quality foot prostheses from carbon or fiberglass is a complex and cost-intensive process. The founders of the start-up steptics have developed a method that automates this process. In doing so, they also rely on modern AI solutions with sustainability in mind.
30/08/2023Stroke victims frequently face lasting disabilities. Recognizing this, the start-up "Time is Brain" has pioneered a portable device for early stroke detection. This innovation empowers doctors to tailor therapeutic decisions throughout a patient's journey, ensuring continuous, real-time brain monitoring from the moment a stroke begins.
04/08/2023Physicists at the University of Würzburg have succeeded in making a new imaging technique ready for use on humans. Radioactive markers and radiation are not necessary for this.
13/07/2023Skin diseases, chronic wounds or postoperative wounds often greatly restrict the quality of life for those affected. Improvement or healing of these conditions is usually time-consuming and costly. Terraplasma medical GmbH, a company of the Viromed Medical Group, uses cold plasma to pursue an effective approach to wound treatment.
07/07/2023A study by researchers at Mälardalen University (MDU) describes what our future healthcare industry may look like.
06/07/2023The new Nature Medicine paper by Prof. Stephen Gilbert, et. al. addresses one of the most pressing international issues of our time: How to regulate Large Language Models (LLMs) in general and specifically in health.
05/07/2023An intelligent suit is hoped to significantly improve rehabilitation after a serious spinal cord injury. The AI-supported solution will be developed over the next three years by researchers from Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU) working in collaboration with Heidelberg University and Heidelberg University Hospital.
30/06/2023Using microfluidics, flow cytometry and electrical impedance, Sarah Du recently received a patent from the United States Patent and Trademark Office for a novel invention that will offer patients a better way to manage their disease.
22/06/2023Researchers from the Biomechanics and Ergonomics research group of the Universitat Jaume I, the Abdomino-Pelvic Oncology Surgery Referral Unit (UR-COAP) of the General University Hospital of Castelló and the Fisabio Foundation have developed an atraumatic uterine manipulator for minimally invasive gynaecological surgery.
20/06/2023While the 5G cellular technology standard is becoming more widespread in the public sector, development on its successor has already started. The German Federal Ministry of Education and Research (BMBF) has launched an initiative to lay the foundations for 6G. This communications technology can also be significant for the healthcare sector.
30/05/2023A cardiovascular stent may fail after implantation. Patients with arteriosclerosis then must undergo angiography again. The condition of the stent is examined or a new stent is placed during this procedure. Barcelona-based company NIMBLE Diagnostics is now working on an easier method to monitor stents after implantation.
27/04/2023Not all advances in medical technology immediately catch your eye – take biologicals, for example. These are molecules that are biotechnologically designed for a specific application. In the German state of Baden-Württemberg, the Biologicals Development Center (BioDevCenter) and its infrastructure aim to bring them to market faster in the future.
29/03/2023Researchers from the University of Geneva (UNIGE), the Geneva University Hospitals (HUG), and the National University of Singapore (NUS) have developed a novel method for evaluating the interpretability of artificial intelligence (AI) technologies, opening the door to greater transparency and trust in AI-driven diagnostic and predictive tools.
07/03/2023Good design not only pleases the eye or the hand. It also guarantees intuitive and safe use and a long service life. Especially in medical technology, this can make a big difference – for staff as well as patients. Medical designers are therefore in great demand. At MEDICA 2022, we talked to two of them about their profession.
20/02/2023Singapore robotics firm AiTreat will be embarking on a new product evaluation in the United States for their massage robot powered by Artificial Intelligence (AI) at Mayo Clinic, USA.
15/02/2023Gattefossé, InProcess-LSP, Knauer, Microfluidics, Skyepharma, and the University of Graz join the RCPE-led European Consortium for Continuous Pharmaceutical Manufacturing (ECCPM) to jointly develop a modular, flexible toolkit to advance industrial-scale production of lipid nanoparticles.
31/01/2023Delve into the world of medical technology! The whole industry will meet at MEDICA in Düsseldorf 13-16 November 2023. Experience high-tech products, meet world market leaders, hidden champions and start-ups or visit the top-class forums and conferences. Regardless what you are looking for: you will find it at MEDICA 2023!
20/01/2023Imperial researchers have developed a low-cost, easy-to-manufacture stabiliser for broken bones to help in regions where such devices are expensive or in short supply and people sometimes resort to homemade options.
16/01/2023How far along is the digitization of the German healthcare system at the moment? It is an interesting question for both users and patients who can benefit directly from digitization and providers who plan to complement the German healthcare market with digitization products and solutions.
16/01/2023The German Center for Cardiovascular Research is centralizing its biospecimens collections, which are currently stored at 60 sites. Therefore, it is looking for two biobanks as scientific cooperation partners. Applications are now open to all German biobanks.
11/01/2023The EU project TEF-Health aims to test and validate innovative artificial intelligence (AI) and robotics solutions for the healthcare sector and accelerate their path to market.
09/01/2023A newly developed rapid test needs only a few seconds to reliably detect pathogens such as SARS-CoV-2. It is based on specially designed magnetic nanoparticles.
04/01/2023License agreement and joint development: Fraunhofer MEVIS commences cooperation with Israeli partner for worldwide use of innovative software technology in ultrasound-aided tumor ablation.
20/12/2022Using a new analytical method, Empa researchers have tracked viruses as they pass through face masks and compared their failure on the filter layers of different types of masks.
12/12/2022Producing infection control clothing requires a lot of energy and uses lots of material resources. Fraunhofer researchers have now developed a technology which helps to save materials and energy when producing nonwovens.
28/11/2022Up to now, the detection of epileptic seizures has been difficult and – especially in the case of minor seizures – inadequate. This is about to change with monikit. In the future, the sensor device and artificial intelligence will be used to collect comprehensive data and thus improve the care of those affected.
17/11/2022Robots have already been part of our everyday live for some time now, whether in our private life or at many workplaces. But how can the automatic helpers be helpful as an assistant in everyday hospital life? We got to know some great ideas at MEDICA 2022.
16/11/2022Instead of bringing the patient to the X-ray unit, would it not be better to bring the X-ray unit to the patient? Solutions for tomorrow is a med-tech company creating innovative products that change the X-ray experience for hospitals, clinics and patients. At MEDICA 2022, we took a look at it.
16/11/2022Finally MEDICA is back and the halls are full! We wanted to know what makes the trade fair so special and interesting for visitors and why you should definitely make the trip to Düsseldorf. You can read the best answers in our photo gallery.
15/11/2022Henkel is a name that many do not necessarily associate with medical technology. Nevertheless, the company can make an important contribution to digital healthcare. In our video interview, we find out what exactly this contribution looks like and why Henkel is exhibiting at MEDICA 2022.
15/11/2022The world of medicine meets again at MEDICA. A variety of high-quality, innovative products and exciting presentations as well as discussions in the forums make it a great event. This year, the trade fair again offers new ideas and developments on an international level. You can get a small insight in our photo gallery.
02/11/2022Watching your diet based on various health issues can sometimes be tiring. To make the process easier and help patients to monitor their intake, the start-up Doinglab developed an artificial intelligence technology that can recognize and understand food. FoodLens provides detailed information about the food with just a picture.
18/10/2022To treat musculoskeletal disorders physical therapy is often essential to help patients suffering from chronic pain. But following a patient’s progress in physical therapy can be difficult without a matching tool. To improve rehabilitation and further personalize treatment, DyCare developed a digital rehabilitation platform called ReHub.
10/10/2022The KIMEDS project aims to develop an AI-supported safety solution across the entire lifecycle of medical software to shorten the time from development to certification of innovative medical technology. The goal is to provide best medical care for patients, prompting a close project collaboration between science, industry, and regulatory authorities.
07/10/2022UNISONO aims to develop a novel system combining an ear-worn sensor with speech recognition.
04/10/2022Virtual clinical trials can be accomplished a lot faster and conducted with more flexibility for patients than in real life. The start-up Virtonomy takes these clinical trials to the next level with the software v-Patients. With v-Patients, a digital twin can be constructed and used in silico clinical trials.
01/09/2022How and, above all, where do we want to age? Preferably within our own four walls, surrounded by our loved ones. How technology can help us feel safe in the process? Busto Automatika specializes in smart home applications and is not only available to help relatives with advice and technology.
01/09/2022Start-ups are the innovation drivers in the medical market. But a good idea alone is not enough. In our topic of the month September, three representatives tell us what hurdles there are on the way to market establishment and tips on how up-and-coming founders can circumvent some of them.
01/09/2022A platform that already provides a basis so that healthcare providers can more easily implement the development and provision of digital solutions. In this interview, CEO Marzio Ghezzi explains the difficulties that the European healthcare market poses for a globally oriented start-up like Mia-Care and why a successful feedback system is indispensable for him.
24/08/2022A team led by Dr. Maximilian Kückelhaus and Prof. Tobias Hirsch from the Centre for Musculoskeletal Medicine at the University of Münster has carried out the first completely robot-supported microsurgical operations on humans.
01/07/2022When we think of modern hospitals, we often think of high-tech medical devices, patient beds surrounded by machines, or networked operating rooms. Yet it is not only the equipment in patient rooms that leads to a better and faster recovery. A hospital that delivers a positive experience for patients, their families, and medical staff centers on smart design from the very beginning.
01/07/2022In addition to medical care, the recovery of patients in the hospital is a key factor. In order for this to take place in the best possible way, the focus in the planning phase should also be on optimal workplace design for medical staff. How can the balancing act between design and functionality be achieved and what will the hospital of tomorrow look like?
01/04/2022Concrete diagnoses are the be-all and end-all in medicine. The Corona pandemic made the conditions for good diagnostics more difficult. Telemedicine offers an alternative - not only in times of pandemic. It is important to exploit the full potential of technical possibilities. Robot-assisted examinations and artificial intelligence can make an important contribution to symptom recognition.
01/03/2022Medicine produces a lot of waste through medical consumables like protective gear or laboratory equipment. All of this gets destroyed due to hygiene reasons after use, but it is nonetheless true: Our resources are not unlimited and medical waste is a burden for the environment, too.
01/03/2022The COVID-19 pandemic forced the use of disposable face masks. Discarding them has become an environmental challenge on a global scale. This has prompted the Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE and the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT to develop an innovative recycling process for used plastics.
15/02/2022For nearly two years, the COVID-19 pandemic has kept a firm grip on the world and caused many intensive care units to hit full capacity. It would help medical professionals tremendously if they could make a reliable prognosis the moment patients are hospitalized. cfDNA screening could play an important role in the assessment of COVID-19 severity in patients.
11/01/2022There are many factors to consider when you plan to enter the medical market in another country. Every country requires different market entry strategies – and countries in Africa are no exception.
22/11/2021Orthopedic auxiliary means are mostly still produced in manual labor today. But orthopedic technology is also trying out new ways by using tools like 3D scanners, digital models and 3D printing. Nadja Singer from Ottobock explains in our video interview how this changes the production of auxiliary means.
18/11/2021The Corona pandemic has put the brakes on the medical industry worldwide through logistic problems and contact restrictions. But despite the crisis, opportunities are still created and companies are still able to develop. We learn more about this at the stand of Zimmer MedizinSysteme at MEDICA 2021.
18/11/20212020 MEDICA could only take place online, 2021 it returned as an on-site event to the trade fair halls. At four days, visitors could finally experience numerous new technologies and ideas from areas like health-IT, robotics, laboratory medicine, imaging, surgery or physiotherapy and orthopaedic technology again. See our most beautiful impressions of MEDICA 2021 here!
18/11/2021Internationality, fresh ideas and innovative developments – MEDICA 2021. Exhibitors from all over the world contribute to making the trade fair an exciting event with high-quality and sophisticated products every year. Get an insight into the impressions and experiences of the exhibitors is this photo gallery.
17/11/2021This year, MEDICA 2021 can once again look forward to many visitors. We asked some visitors why they visit the fair, for how many years they have been coming here and what they particularly appreciate about MEDICA. You can get to know them in our photo gallery.
12/11/2021In 2020, MEDICA and COMPAMED took place as pure online events due to the corona pandemic. In 2021, the fairs will be arranged as hybrid events: on-site in Düsseldorf and complemented with additional online services. We talked to Christian Grosser, Project Director Health & Medical Technologies at Messe Düsseldorf, about this relaunch.
20/09/2021Researchers released a new type IIR surgical mask with an intelligent fabric that can instantaneously deactivate the SARS-COV-2 virus that is responsible for COVID19.
01/07/2021Orthopedic technology is a true craft: That's because prostheses and orthoses are rarely off-the-shelf products. Orthopedic technicians must typically use different materials to custom create and fit the devices. Many of these processes are manual. For several years now, 3D scanning and 3D printing have modernized the industry thanks to digital design freedom and flexible production.
22/06/2021Data silos still prevail in the German health care system: providers store and collect patient data for their own purposes, making it not available to the entire organization. Many still mainly share this data in analog form. Comprehensive, integrated delivery networks would make many practices easier.
10/06/2021Helping hospitals in Germany build a long-term digitization strategy - that is the declared goal of the young founding team of the innovation go platform, which started at the Osnabrück University of Applied Sciences. The project is funded by EXIST, a support program of the German Federal Ministry for Economic Affairs and Energy (BMWi).
22/04/2021Behind every hospital are sophisticated and complex logistics that must run like clockwork to keep things going. But how good are the processes when it comes to managing patient care and hospital staff? There are many weak links that can be avoided. Comprehensive digitization and efficient, targeted healthcare workforce management are required to set up hospital logistics for future success.
21/04/2021In this interview with MEDICA-tradefair.com, Lina Behrens explains how Flying Health helps its clients develop new business models and gives an outlook on the future of healthcare.
17/02/2021Artificial intelligences (AI) are able to help medical professionals detect diseases. This is based on medical data records from which the AI can draw conclusions about diseases. These conclusions are most accurate when the extraction of the data sets is directly linked to the processing.
03/02/2021Medical hygiene does not just play a key role during the COVID-19 pandemic. Preventing the transmission of infectious diseases and especially the spread of multidrug-resistant organisms is paramount even in non-pandemic times. While hygiene practices in hospitals and medical offices are essential, the industry can also make an important contribution with hygienic product design.
06/01/2021Until now, it sounded quite odd to receive reimbursement for digital health apps: There are too many and the majority has never been checked for safety and positive effects. Thanks to the "Digital Health Applications Ordinance", these apps can now reach the German market in a regulated way, physicians can prescribe them and statutory health insurance companies reimburse their use.
16/12/2020Large hospital complexes such as the University Hospital Bonn can save millions when they implement well thought-out energy-saving measures. Michael Körber reports how the UKB is already implementing this with the help of combined heat and power units and a comprehensive sustainability concept. Manuel Merges describes how these projects were also possible with the help of external financing.
16/11/2020Does the medical technology industry profit from the corona pandemic? Partly yes, but at large, it also suffers through this crisis. This is one of the topics that the industry association SPECTARIS addresses during virtual.MEDICA 2020. Marcus Kuhlmann talks about this and other topics in our video interview.
02/11/2020This year is completely different! Normally, we would offer you an advanced peek into the MEDICA’s halls in Dusseldorf at this point. But due to the corona pandemic, the trade fair takes place online as virtual.MEDICA. We nevertheless took a look at this year’s topics of special interest.
28/10/2020We asked three start-ups to shortly introduce themselves in their own words in advance to virtual.MEDICA 2020. Come take a look!
24/08/2020For the annual MEDICA trade fair, companies from all over the world assemble in Düsseldorf. The Israel Export Institute has been a part of it for the last couple of years. They present medical devices and digital innovations from different Israeli companies at their joint booth.
22/07/2020Necessity is the mother of invention: While many companies have been hit hard by the coronavirus pandemic, some were able to find the hidden business opportunities the unique situation has created. One example of how companies can benefit from the Covid-19 crisis is the production of medical protective gear.
01/07/2020In times of climate change, interest in ecological alternatives and solutions has grown in the health sector, too. However, for the complex organism of a hospital this sometimes poses a great challenge. How can energy be saved despite continuous operation? To what extent are hygiene standards and waste reduction compatible? And what costs are associated with the Green Hospital?
01/07/2020The REGIOMED Klinikum Lichtenfels is the lighthouse project of the "Green Hospital Initiative Bayern" (Bavarian Green Hospital Initiative), which launched in 2014 and aims to increase energy efficiency and promote sustainability in Bavarian hospitals. Lichtenfels took things one step further by constructing an optimized new building where sustainability is an integral part.
01/07/2020Each day, a hospital consumes as much energy as a small city. Medical facilities work around the clock to provide excellent patient care. Environmental protection tends to play a secondary role as high safety and hygiene standards seem to be incompatible with optimized resource utilization – but is that really the case? Green Hospitals prove that environmental sustainability is possible.
03/02/2020Coronary heart disease can come as a complete surprise and occur suddenly. Cardisiography was designed to lower the risk and make faster intervention possible. As a non-invasive heart screening test, cardisiography offers the possibility of early detection for heart diseases.
22/01/2020Patients have to undergo a gastroscopy to rule out gastrointestinal conditions. Many dread this procedure since a thin, flexible tube is being pushed through the esophagus and stomach. Ovesco Endoscopy AG has teamed up with other project partners in the nuEndo research project to develop a capsule endoscopy device that is tiny, easy to swallow and makes the test more comfortable for the patient.
01/01/2020Today, people tend to live longer, while an increasing number of patients suffer from osteoarthritis. Even younger generations are now at a higher risk of getting osteoarthritis due to the frequent use of mobile devices. The EU research project APRICOT aims to develop a novel type of implant for the treatment of osteoarthritis of the hands – helping patients heal themselves.
02/12/2019Smart home systems are a perfect example of how technology can make our daily lives easier. The fact that they can use a tablet to adjust lighting and blinds in every room benefits older adults in more ways than one. These types of technical systems are a part of Ambient Assisted Living (AAL) and create a safe living environment for older persons.
01/10/2019When the halls of MEDICA are open to the world to showcase medical innovations, one joint exhibition booth is guaranteed to attract special attention - the MEDICA START-UP PARK. The startups that present their advances in this setting are interesting to visitors and investors, yet long-time exhibitors and big businesses can also benefit from building relationships with these young companies.
01/10/2019The medical market is booming - medical ideas and visions for the future are more in demand than ever. Especially at MEDICA START-UP PARK 2019 young founders want to present their product innovations. Develop business contacts, meet investors and experience an international environment in just one place. Discover in our Topic of the Month what makes MEDICA START-UP PARK unique.