26.05.2023Modern prostheses are already smart, but they still have their limits. The Assistive Intelligent Robotics Lab at FAU is therefore also researching an intuitive and non-invasive method for controlling prostheses. In our interview, those involved tell us exactly what they are working on together with neurologists and surgeons from the Erlangen University Hospital.
25.05.2023A low-cost robotic arm created by students as an alternative to conventional prostheses: The ARM2u biomedical engineering team, from the UPC’s Barcelona School of Industrial Engineering (ETSEIB), is working on new functions for their low-cost 3D-printed transradial prosthesis.
19.04.2023A novel robotic bronchoscope system can non-intrusively access the area of interest within the lung for minimally invasive pulmonary lesions sampling, the gold standard of lung cancer diagnoses.
09.03.2023The Fraunhofer Heinrich-Hertz-Institut (HHI) is part of the EU project TEF-Health (Testing and Experimentation Facility for Health AI and Robotics), which aims to establish a test infrastructure for artificial intelligence (AI) and robotics in healthcare.
27.02.2023Speaking and hearing are the two most important abilities that connect humans to their environment. If they get limited through disease or injury, it is all the more important to restore them as broadly as possible. Depending on the cause for their limitation, there are different surgical treatment possibilities. We take a look at current methods in our Topic of the Month.
27.02.2023The ear, nose and throat are full of tiny structures, and each plays an important role in the health of a person. The inside of the ears makes it possible for us to hear, while the inside of our nose enables us to smell. The larynx contains the vocal cords, which allow us to speak and stay connected to the outside world.
27.02.2023Until now, robots have assisted surgeons in the operating room to enhance their capabilities. CASCINATION is a Swiss medical device company who has teamed up with MED-EL – the Innsbruck-based hearing implant company – to develop a system that can perform an autonomous cochlear implantation. Since then, HEARO has been successfully used – including at the Medical University of Vienna (MedUniWien).
20.02.2023Singapore robotics firm AiTreat will be embarking on a new product evaluation in the United States for their massage robot powered by Artificial Intelligence (AI) at Mayo Clinic, USA.
10.02.2023Current patient simulators are mostly mannequins that can simulate vital functions via built-in electronics but are otherwise lifeless. An android patient could bring a breath of fresh air to training in the future. It can help hospital staff to better recognize delirium in patients and thus increase patient safety.
02.02.2023In the recently launched NeuroQ lighthouse project, the project partners develop highly sensitive diamond-based quantum sensors that will enable paralyzed people to control neural exoskeletons more precisely.
11.01.2023The EU project TEF-Health aims to test and validate innovative artificial intelligence (AI) and robotics solutions for the healthcare sector and accelerate their path to market.
01.12.2022Currently, wound care is limited to either waiting for wounds to heal while keeping them clean and free of infection or using grafts from the patient’s own body to cover larger defects. With the ongoing development tissue engineering and bioprinting, there could be a third option in future: Will we be able to print new tissue directly in the OR to cover surgical wounds?
17.11.2022Robots have already been part of our everyday live for some time now, whether in our private life or at many workplaces. But how can the automatic helpers be helpful as an assistant in everyday hospital life? We got to know some great ideas at MEDICA 2022.
16.11.2022Medical robots are on the advance: Highly precise, rigid or flexible, they also have to meet the criteria for sterile surgical conditions. At MEDICA 2022, we visit the stand of Stäubli Tec Systems and see for ourselves why robots can be the helping hand of surgeons.
16.11.2022North Rhine-Westphalia offers good conditions as a location for medical technology companies. We spoke to Refined Laser Systems GmbH, United Robotics Group GmbH and weLLgo Medical Products GmbH during our tour of the NRW joint stand in Hall 3 / C80.
04.10.2022Overall technical progress does not stop at the operating rooms of this world. Whether it's completely new ideas or robotic optimizations of classic methods – research teams are coming up with contemporary answers to long-standing questions using the diverse possibilities of the present day.
04.10.2022The rise of robotics in medicine will result in more applications in this sector in the future. This necessitates the design of robotic systems that meet the requirements for the respective medical implementation. Scientists at the Institute of Medical Device Technology at the University of Stuttgart are developing the systems, components, sensors, and control technology to meet this demand.
04.10.2022A successful endoscopic intervention hinges on two key factors: the endoscope must have excellent maneuverability and high structural rigidity. Unfortunately, today's devices cannot meet both requirements at the same time. Tim-Lukas Habich wants to change that by bridging the gap between flexible and rigid robots.
01.10.2022Innovative medical technology is driving the digitization of healthcare institutions and is opening a world of possibilities. This is especially the case for minimally invasive robotic-assisted surgery.
24.08.2022A team led by Dr. Maximilian Kückelhaus and Prof. Tobias Hirsch from the Centre for Musculoskeletal Medicine at the University of Münster has carried out the first completely robot-supported microsurgical operations on humans.
02.05.2022One of the most time-consuming tasks in hospitals is the manual cleaning and disinfection of high touch points and surfaces such as door handles, buttons, and switches. These are areas where microorganisms are spread by direct skin contact. The “MobDi – Mobile Disinfection” research project is developing a robot that automatically cleans and disinfects these areas. It will use cold plasma.
02.05.2022Disinfection and sterilization are the most reliable and best way to ensure patient safety in healthcare settings. Whether it is at the point of care when the patient is either at the hospital or medical practice, or wherever medical devices are manufactured and packaged in a sterile environment – the transmission of pathogens and microorganisms can have severe health impacts.
01.04.2022Concrete diagnoses are the be-all and end-all in medicine. The Corona pandemic made the conditions for good diagnostics more difficult. Telemedicine offers an alternative - not only in times of pandemic. It is important to exploit the full potential of technical possibilities. Robot-assisted examinations and artificial intelligence can make an important contribution to symptom recognition.
04.01.2022Robotics have made their way into many areas in healthcare. So far, intensive care units had not utilized robotic systems. Now there is an application that facilitates ICU care tasks.
26.11.2021A lot of laboratory tasks require high precision on one hand, on the other they tend to be repetitive and tiring. While humans can only work for a limited time here while staying effective, robots are able to work without taking a break. The start-up bAhead wants to make collaborative robots, CoBots, adaptable helpers with the help of AI. We learn more from CEO & Founder Rainer Treptow.
17.11.2021The laboratory industry is currently in commotion: the whole world is watching when it comes to news from the Corona pandemic. But tests and the sequencing of new variants are not the only stress factors: robotics, networking and AI are finding their ways into laboratories and turn existing processes upside down. We talked to some of the exhibitors at MEDICA 2021 about this.
16.11.2021The smaller the surgery, the more precise it has to be. That's why surgeons need high-precision technology for minimally invasive procedures. Robots are often already used in the OR to perform surgery with millimeter precision. At MEDICA 2021, we learn more about the status quo of technology that enables minimally invasive procedures.
01.10.2021Unpacking and sorting of blood samples from general practitioners is a monotonous and time-consuming task. The Aalborg University Hospital has now automated the process: Up to 3000 blood samples every day are unpacked and sorted by two lab robots provided by LT Automation. Furthermore, the samples are temperature monitored and tracked, using the Intelligent Transport Boxes.
09.08.2021Preliminary findings by Kessler researchers show that the use of a robotic exoskeleton during inpatient rehabilitation for acute stroke may improve function. Gait training in the robotic exoskeleton can provide high-dose therapy soon after stroke, when it is likely to have its maximal effect on functional ambulation.
02.08.2021Robots in the operating theatre are no longer a rarity in certain medical fields - they support and relieve doctors and sometimes they can make operations more efficient and easier with artificial intelligence (AI). However, they are rarely found in the operating theatre during cardiological interventions.
25.05.2021One of the most time-consuming tasks in a hospital is the disinfection of often-used surfaces like light switches or door handles. This is especially important during the corona pandemic. The "DeKonBot" by Fraunhofer IPA could support hospital staff here in the future. Learn in our video interview with Dr. Birgit Graf how the robot works.
01.04.2021Surgeons have only limited options to practice surgical techniques before they enter the operating room. The implantation of an endoprosthesis requires extensive practical training since it necessitates strength and utmost precision. The "Dynamic HIPS" project develops a virtual reality hip implant simulator that provides realistic haptic feedback.
09.03.2021Robotics has been gaining importance in many areas of life for years, not least in medicine. Robots are already being used in the operating room today, but they do not always play the leading role – a circumstance that will certainly change in the long term.
01.03.2021Keeping your distance, washing your hands, wearing a mask – such protective measures have been the order of the day since the SARS-CoV-2 pandemic began. But appropriate products or procedures are not suitable for everyone, are often unavailable or, despite everything, carry a residual risk. The need for new, better solutions is high. But necessity is the mother of invention.
08.12.2020If Kevin was alone in the lab at night, the next morning, the workers will not find chaos, but labeled tubes and prepared samples. Kevin is a laboratory robot developed by Fraunhofer IPA to relieve the strain on laboratory workers so that they can concentrate on the essentials: research and diagnostics.
23.11.2020Surgeons do not only need much concentration, but also strength and endurance. Robotic arms under their control can do part of this work. Prof. (Saitama Med. Univ.) Dietmar Stephan from the St. Marien Hospital Siegen describes in our video, how controls and haptic feedback can make surgery with a robot easier.
02.11.2020Hospitals are considered to be a primary route of disease transmission. That is why patient rooms, operating rooms, and waiting areas should be disinfected regularly and thoroughly - and not just during the coronavirus pandemic. At the virtual.MEDICA trade fair, ICA Traffic GmbH will showcase the HERO21 robot, a disinfection unit that uses UVC radiation.
01.10.2020Whether it's process automation, robotics in the OR and nursing areas, or the digitalization of patient records - in a smart hospital, everything comes together to form a connected hospital. Find out exactly how the Smart Hospital is being developed with the help of information platforms and projects in the Topic of the Month.
15.09.2020Some tasks in the laboratory are repetitive, need to be done extremely precise and require a lot of time. Such tasks are very tedious for humans, but they are tailor-made for robots. Such is the case with the "AutoCRAT" project at the Fraunhofer Institute for Production Technology IPT in Aachen. Here, a robotic platform is developed to produce stem cells for the treatment of osteoarthritis.
01.09.2020There is likely no other branch of medicine where you can find as many high-tech devices as in modern laboratories. A major part of diagnostic and biomedical research is done here. A lot of individual steps in work processes need to be followed precisely to ensure the results’ quality. Also, a lot of data is generated here.
01.09.2020Accuracy is paramount in laboratory settings and ensures that lab results are valid. Errors in a lab can render series of tests unusable and waste precious time and money. In the medical realm, this might even result in clinical trial errors. Augmented reality (AR) can help laboratory technicians to prevent errors and guide their work in the future.
19.08.2020The Neurological University Hospital in Tübingen is a world leader in research on TMS (Transcranial Magnetic Stimulation). In this report you will learn how the stroke therapy, which is always complemented by physiotherapeutic treatment, is being developed from a punctual to an entire network treatment in the brain.
04.05.2020In the operating room, minimally invasive procedures are increasingly used. Robot-assisted systems are a great help for the surgeon. They support the surgeon and are extremely precise. Through innovative research approaches, robotic systems are constantly evolving.
04.05.2020Surgical robots are transforming the operating room. They deliver many benefits but also present new challenges. That is why the efficient handling of robotic mechanisms must also be reflected in the respective training courses.
04.05.2020Robotic surgical systems are often used to perform minimally invasive procedures. The daVinci surgical system is still one of the market leaders and is especially well suited to perform prostatectomies, a surgical option for prostate cancer.
04.05.2020More compact, more flexibility, and more precision - these are the main characteristics developers strive for as they advance robotic-assisted surgical systems for the operating room. Several technology providers have already shown how it’s done, including the makers of the popular daVinci Surgical System. Yet for robotic-assisted systems, the sky is the limit.
01.01.2020Surgery is required if you need an artificial joint. Patients and doctors must select the type of surgery that’s best suited and choose between robot-assisted, traditional or minimally invasive surgical approaches. Post-operative risks should be kept to a minimum, while benefits should outweigh any possible complications.
18.12.2019A child who has to miss many days of school due to long-term illness? An older adult living alone or in a nursing home? The Norwegian startup No Isolation believes that nobody should have to experience social isolation, no matter how old you are. The company uses technology to help combat loneliness.
21.11.2019Hightech solutions for hygiene in the medical sector have been getting better and faster. There are not only machines that can disinfect everything by themselves, but there are portable and handy sterilisation solutions as well. At MEDICA 2019 you can find everything that is up-and-coming around medical hygiene.
20.11.2019Nobody will expect to meet horses at MEDICA. Even though, visitors can learn more about hippotherapy that is aimed at patients with neurological deficits – for example through MS or in rehabilitation after stroke. Better yet, they can take a seat at a horseback themselves. This is possible thanks to “hirob” here at the stand of the intelligent motion GmbH from Austria.