Hygiene and sterilization: Hightech for clean surfaces
Menu

Image: A man and a woman in a workshop check bio-based material for the production of respiratory masks; Copyright: Hamburg/TU Ilmenau

Hamburg/TU Ilmenau

Environmentally friendly respiratory masks: sustainable and biobased

10.07.2024

In view of the global challenges posed by environmental pollution and the need to make medical protective equipment efficient and sustainable, a team at Ilmenau University of Technology, led by Prof. Florian Puch, has developed an innovative solution: bio-based respiratory masks.
Read more
Image: Surgical instruments in a metal sieve; Copyright: Chalabala

Chalabala

Sterile supplies: AI-based recognition of surgical instruments with Cir.Log

04.04.2024

The Cir.Log project between Charité Facility Management GmbH (CFM) and Fraunhofer IPK aims to increase the efficiency of sterile processing in hospitals and improve patient safety. Essentially, the aim is to create a smooth transition from current workflows to a more efficient, technology-supported system.
Read more
Image: Storage room with sterilely packed textiles in a hospital; Copyright: Mint Images

Mint Images

Disinfection in hospitals: textiles inhibit pathogens

14.02.2024

Antimicrobial textiles can curb the spread of pathogens in hospitals. On the one hand, they reduce the amount of disinfection required by staff and, on the other, they increase the protection of patients against infection. Empa in Switzerland has tested the coating of curtains with antimicrobial substances in a study.
Read more
Image: Two women looking at a display of cells on a monitor; Copyright: University of Jyväskylä

University of Jyväskylä

Antiviral resin destroys COVID-19 from plastic surfaces

06.02.2024

Researchers at the University of Jyväskylä in Finland are pioneering the development of antiviral surfaces to mitigate the spread of infectious diseases, particularly focusing on coronaviruses.
Read more
Image: Scanning electron microscopy, 30,000x magnification, colored: Even distribution of the antimicrobial coating on the textile fibers; Copyright: Empa

Empa

Antimicrobial hospital curtains - Bacteria, stay out!

01.12.2023

A coating process can be used to treat fabrics in such a way that bacterial and viral pathogens are killed or inhibited in their growth. In hospitals, the coated textiles could be used in future as antimicrobial curtains between patient beds, for example.
Read more
Image: inexpensive do-it-yourself (DIY) “Corsi-Rosenthal Box” air purifier; Copyright: UConn photo

UConn photo

EPA testing shows the power of D-I-Y air filters to trap viruses

07.11.2023

There is a low-cost way for you to protect yourself and reduce your risk of respiratory diseases such as flu, RSV, and COVID-19. Build yourself a Corsi-Rosenthal box (CR box) in 30 minutes with just $60 worth of common hardware store supplies.
Read more
Image: The monitor uses a biosensor made with nanobodies that is integrated into an air sampler that operates based on the wet cyclone technology; Copyright: Joseph Puthussery

Joseph Puthussery

Biosensing: air monitor can detect COVID-19 variants

13.07.2023

Scientists are looking at ways to surveil indoor environments in real time for viruses. By combining recent advances in aerosol sampling technology and an ultrasensitive biosensing technique, researchers at Washington University in St. Louis have created a real-time monitor that can detect any of the SARS-CoV-2 virus variants in a room in about 5 minutes.
Read more
Image: A scientist in lab uniform inspects a smooth surface; Copyright: StreetOncamara_From_Twenty20

StreetOncamara_From_Twenty20

NOVA project: next generation of antimicrobial coating technologies

07.07.2023

Researchers develop and test highly efficient, environmentally friendly and stable antimicrobial (antibacterial, antiviral, antifungal) coating technologies in the NOVA project.
Read more
Image: The surface of a door handle is cleaned with disinfectant; Copyright: Ruhr-Universitaet-Bochum

Ruhr-Universitaet-Bochum

Hygiene: monkeypox viruses relatively stable on surfaces

23.05.2023

A study conducted by the Department of Molecular and Medical Virology at Ruhr University Bochum, Germany, has shown that temperature is a major factor in this process: at room temperature, a monkeypox virus that is capable of replicating can survive on a stainless steel surface for up to eleven days, and at four degrees Celsius for up to a month.
Read more
Image: Newborn baby lies on his stomach in an incubator; Copyright: mvaligursky

mvaligursky

Incubators: method to reduce alcohol absorbed from disinfectants used

22.03.2023

Researchers from the University of Tsukuba showed the association between the concentration of evaporated alcohol from alcohol-based disinfectants used for incubators and the amount of alcohol absorbed by premature infants.
Read more
Image: Xing Xie is holding holding a chip in close up; Copyright: Georgia Tech

Georgia Tech

New ultrafast water disinfection method is more environmentally friendly

27.02.2023

Georgia Institute of Technology researchers have found a way to use small shocks of electricity to disinfect water, reducing energy consumption, cost, and environmental impact.
Read more
Image: The doctor treats the wound on the patient's leg in a clinic room; Copyright: Okrasyuk

Okrasyuk

Wound care: New spray fights infections and antibiotic resistance

07.02.2023

A group of researchers at Chalmers University of Technology in Sweden are presenting a new spray that can kill even antibiotic-resistant bacteria, and that can be used for wound care and directly on implants and other medical devices.
Read more
Image: Microscopic image: The picture shows a textile fiber with salt crystals (light blue) and viruses around 100 nanometers in size (green); Copyright: Empa

Empa

Watching viruses fail

20.12.2022

Using a new analytical method, Empa researchers have tracked viruses as they pass through face masks and compared their failure on the filter layers of different types of masks.
Read more
Image: An employee in protective clothing holds a piece of non-woven fabric in his hand and examines it; Copyright: Freudenberg Performance Materials

Freudenberg Performance Materials

ProQuIV optimizes the production of nonwoven masks

12.12.2022

Producing infection control clothing requires a lot of energy and uses lots of material resources. Fraunhofer researchers have now developed a technology which helps to save materials and energy when producing nonwovens.
Read more
Image: Preview image to video

Safe and clean – Steelco S.p.A.

16.11.2022

Safe reprocessing of medical instruments is particularly important in laboratory or hospital operations. It is good to have a reliable partner who does not shy away from any challenge: Steelco S.p.A. offers efficient and versatile solutions for even the most specific customer requirements of equipment and systems for washing, disinfection, and sterilization. We learn more at MEDICA 2022.
Read more
Image: Preview image of the video

Helpful hands redefined – Stäubli Tec-Systems GmbH

16.11.2022

Medical robots are on the advance: Highly precise, rigid or flexible, they also have to meet the criteria for sterile surgical conditions. At MEDICA 2022, we visit the stand of Stäubli Tec Systems and see for ourselves why robots can be the helping hand of surgeons.
Read more
Image: Preview picture of video

In the name of hygiene and safety: modern hospital equipment

14.11.2022

In addition to the obvious medical care of patients, infection prevention in hospitals is also a major topic. Which devices are essential in the fight against bacteria, pathogens and co. and what actually happens to potentially contaminated medical waste?
Read more
Image: Animation of a hospital room with ceiling supply unit and LED lighting; Copyright: Dräger Medical Deutschland GmbH

Dräger Medical Deutschland GmbH

Healing Environment: thoughtful design improves patient care

01.07.2022

Most people would not immediately consider hospitals places that create a "feel-good atmosphere". And yet, the environment plays a key role in a patient’s healing process and recovery. As a leading medical and safety technology product manufacturer, Dräger Medical Deutschland GmbH knows how to create a design that blends function with comfort.
Read more
Image: The KARMIN room, with (from left to right) wet room, nursing area, bed and visitor zone at the window; Copytight: Tom Bauer |TU Braunschweig

Tom Bauer |TU Braunschweig

Architecture rather than antibiotics: patient room takes center stage

01.07.2022

Hospitals take many precautions – including hygiene concepts – to prevent the spread of infection but are still unable to eliminate all pathogens. Since 2016, an interdisciplinary research team has been studying how architecture and design can help prevent the spread of highly infectious and multidrug-resistant pathogens as part of the KARMIN project.
Read more
Image: Construction plans of a building; Copyright: FabrikaPhoto

FabrikaPhoto

Project: hospital construction

01.07.2022

In addition to medical care, the recovery of patients in the hospital is a key factor. In order for this to take place in the best possible way, the focus in the planning phase should also be on optimal workplace design for medical staff. How can the balancing act between design and functionality be achieved and what will the hospital of tomorrow look like?
Read more
Image: Black, box-like device that directs a small, blue flame towards a light switch; Copyright: Fraunhofer IST/Paul Kurze

Fraunhofer IST/Paul Kurze

Cold plasma: Contactless disinfection of surfaces

02.05.2022

One of the most time-consuming tasks in hospitals is the manual cleaning and disinfection of high touch points and surfaces such as door handles, buttons, and switches. These are areas where microorganisms are spread by direct skin contact. The “MobDi – Mobile Disinfection” research project is developing a robot that automatically cleans and disinfects these areas. It will use cold plasma.
Read more
Image: Cleaning staff at a hospital is wiping the floor of an OR; Copyright: karrastock

karrastock

Disinfection: Solutions to stop pathogens from spreading

02.05.2022

Disinfection and sterilization are the most reliable and best way to ensure patient safety in healthcare settings. Whether it is at the point of care when the patient is either at the hospital or medical practice, or wherever medical devices are manufactured and packaged in a sterile environment – the transmission of pathogens and microorganisms can have severe health impacts.
Read more
Image: a clean room of SOMI medical, in the rear area is an employee sitting, in the front area is a filled storage rack; Copyright: SOMI medical GmbH

SOMI medical GmbH

Production hygiene: the packaging process from warehouse to logistics

02.05.2022

Applications of telemedicine surged in popularity in efforts to reduce the COVID-19 infection risk for both medical professionals and patients. Unfortunately, the services typically lack a proper diagnostic option.
Read more
Image: A room in a hospital with white floor, ceiling, walls and cabinets; Copyright: Prostock-studio

Prostock-studio

Hygiene and sterilization: Hightech for clean surfaces

02.05.2022

Due to the Corona pandemic, a lot of attention is currently focused on the protective effect of medical masks. But especially in medical work areas, the protection against aerosol transmission is not enough, because a lot of pathogens can be transmitted trough direct contact with people or surfaces. Hygienic measures against contact infections like these are very costly, though.
Read more
Image: Surgeon is inserting a heart catheter into a patient’s body; Copyright: PantherMedia/fly_wish

Single-use catheter reprocessing in electrophysiology

01.03.2022

Catheter ablation is a way to treat irregular heartbeats, or arrhythmias, like atrial fibrillation. Although catheters are classified as single-use or disposable devices, the complex instruments can be reused multiple times thanks to extensive reprocessing.
Read more
Image: A used surgical mask is hanging from a branch in the woods; Copyright: PantherMedia/Valery Vvoennyy

PantherMedia/Valery Vvoennyy

Medical consumables: Will the pandemic inspire more sustainable practices?

01.03.2022

The COVID-19 pandemic has prompted a global increase in healthcare commodities and medical consumables: demand for face masks, gloves, protective apparel, and other personal protective equipment has soared as a result. This also applies to rapid tests, reagents, laboratory equipment and supplies. But all this sparked a myriad of problems.
Read more
Image: Several medical masks as well as other disposable waste products in a trash can; Copyright: PantherMedia / Fotofabrika

PantherMedia / Fotofabrika

How to reduce plastic waste: innovative process promises recycling of single-use face masks

01.03.2022

The COVID-19 pandemic forced the use of disposable face masks. Discarding them has become an environmental challenge on a global scale. This has prompted the Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE and the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT to develop an innovative recycling process for used plastics.
Read more
Image: PD Dr. med. Arne Wieser and Prof. Dr. Christoph Haisch; Copytight: LMU University Hospital Munich

LMU University Hospital Munich

Room divider based on UV-C light inactivates SARS-CoV-2 aerosols

22.12.2021

Despite myriad precautionary measures, virus-contaminated aerosols still pose a serious problem indoors. An invisible protective wall of UV-C ligh could provide a solution and reliably curb the spread of viruses and other pathogens in rooms in the future while allowing total freedom of movement.
Read more
Image: Woman wearing a FFP2 facemask in a Flower store, Copyright: Gettyimages

Gettyimages

Optimal usage time for face coverings

23.08.2021

Researchers from Surrey's renowned Global Centre for Clean Air Research (GCARE) explore two key questions: how long a mask should be worn; and when should it be discarded, recycled or washed to optimise its usage time.
Read more
Image: A modern hospital room with two beds; Copyright: Tom Bauer/TU Braunschweig

Tom Bauer/TU Braunschweig

Patient room of the future comes to Braunschweig

22.06.2021

Architecture can prevent infections in hospitals. The walk-in model of a new type of patient room shows how this can be done. It was developed by a team from the fields of architecture, medicine and molecular biology in the KARMIN research project.
Read more
Image: Preview picture of video

Mobile hygiene robot in the hospital – The cleaning force of the future

25.05.2021

One of the most time-consuming tasks in a hospital is the disinfection of often-used surfaces like light switches or door handles. This is especially important during the corona pandemic. The "DeKonBot" by Fraunhofer IPA could support hospital staff here in the future. Learn in our video interview with Dr. Birgit Graf how the robot works.
Read more
Image: Simulation models of cough droplets falling to the ground in front of a person; Copyright: V. D'Alessandro, M. Falone, L. Giammichele, R. Ricci

V. D'Alessandro, M. Falone, L. Giammichele, R. Ricci

Irradiating COVID-19 cough droplets with UV-C lamps

16.03.2021

Using supercomputer numerical modeling of saliva droplets' diffusion produced by coughs, researchers in Italy explore deactivating COVID-19 virus particles via UV-C light.
Read more
Image: Finger of a woman touches sketch of a luminous light bulb; Copyright: PantherMedia/Andreus

Hygiene and disinfection: innovations against Covid-19

01.03.2021

When urgently needed products such as masks become scarce or conventional disinfection processes reach their limits, inventiveness is called for. And there is usually plenty of it in times of crisis. What innovations has the current corona pandemic already produced? How can they supplement or even replace existing products and processes?
Read more
Image: A long hallway in a hospital with a lot of doors; Copyright: PantherMedia/dlpn

Disinfection: antibacterial coating on surfaces in the ICU

01.03.2021

All hospitalized patients are susceptible to contracting a nosocomial infection, with ICU patients being particularly at risk. The effects of these hospital-acquired infections are often more dangerous than the original reason for the in-patient hospitalization. The "PACMAN" project is now testing an antimicrobial coating for frequently used contact surfaces at high risk of pathogen transmission.
Read more
Image: Pharmacist with the transparent mask miama; Copyright: iuvas medical GmbH

Miama: transparent face mask uncovers facial expressions

01.03.2021

Over 50% of our communication is made up of facial expressions and gestures. Nonverbal communication is especially important to deaf or hearing-impaired people or people with dementia. A conventional mask makes this more difficult, may promote miscommunication and contribute to medical errors in extreme cases. Yet it is paramount to use a mask amid this pandemic. Miama helps solve this problem.
Read more
Image: disinfection of a door handle around which coronaviruses are flying; Copyright: PantherMedia/AntonMatyukha

Necessity is the mother of invention – innovations in the corona pandemic

01.03.2021

Keeping your distance, washing your hands, wearing a mask – such protective measures have been the order of the day since the SARS-CoV-2 pandemic began. But appropriate products or procedures are not suitable for everyone, are often unavailable or, despite everything, carry a residual risk. The need for new, better solutions is high. But necessity is the mother of invention.
Read more
Image: Drops of a solution are filled into a microwell plate; Copyright: Tel Aviv University

Tel Aviv University

Ozone effective against coronavirus

25.02.2021

Studies have shown that SARS-CoV-2 remains active on aerosols and surfaces for between several hours and several days, depending on the nature of the surface and environmental conditions.
Read more
Image: A hospital employee is cleaning an endoscope; Copyright: PantherMedia/sielemann

PantherMedia/sielemann

Medical devices: hygienic design combats pathogens

03.02.2021

Medical hygiene does not just play a key role during the COVID-19 pandemic. Preventing the transmission of infectious diseases and especially the spread of multidrug-resistant organisms is paramount even in non-pandemic times. While hygiene practices in hospitals and medical offices are essential, the industry can also make an important contribution with hygienic product design.
Read more
Image: Prototype of the airlock; Copyright: Fraunhofer IBP

Fraunhofer IBP

Covid-19: protective canopy prevents infection

19.01.2021

The risk of infection with SARS-CoV-2 is particularly high indoors. This is because, in addition to smear and droplet infection, infection via aerosols that accumulate and spread in the air is also possible there. Sufficient air exchange or air purification help to prevent this. The protective canopy developed by Fraunhofer IBP also follows such an approach.
Read more
Image: A nurse is donning a red cloth mask; Copyright: PantherMedia/Jakub Mrocek

PantherMedia/Jakub Mrocek

Reviewing the evidence for cloth mask use among health care workers

13.01.2021

A rapid, evidence-based review summarizes the effectiveness of cloth masks in protecting health care clinicians from respiratory viral infections, such as COVID-19. Nine studies were included in the review, and all but one were conducted prior to the COVID-19 pandemic.
Read more
Image: Head of a mannequin with transparent face shield and surgical mask; Copyright: Messe Düsseldorf/Achim Wiese

virtual.MEDICA 2020: Experience medicine online

02.11.2020

This year is completely different! Normally, we would offer you an advanced peek into the MEDICA’s halls in Dusseldorf at this point. But due to the corona pandemic, the trade fair takes place online as virtual.MEDICA. We nevertheless took a look at this year’s topics of special interest.
Read more
Image: Surgical utensils lying on a table in the OR; Copyright: WavebreakmediaMicro - stock.adobe.com

Sustainable Nonwoven Solutions Improve Hygiene

02.11.2020

Whether it is hospitals or care homes - the right hygiene tools are crucial for process efficiency. These products can be composed of a wide variety of materials. NORAFIN offers a sustainable solution with products made from nonwoven fabric.
Read more
Image: A blue, box-shaped device with a handle and a nozzle; Copyright: 99Technologies S.A.

Disinfection: let mist do the work

02.11.2020

Healthcare settings require sharp weapons to fight both hospital-acquired infections and pathogens like SARS-CoV-2. Besides protective equipment, regular room disinfection is one of them. But they require time and are also prone to error if done manually. Fully automated solutions are needed to relief hospital staff from this exhausting work and perform it reliably. So, why not fog the room?
Read more
Image: empty operating room with disinfection robot; Copyright: stock.adobe.com/allensima

Disinfection: a robot nips viruses in the bud

02.11.2020

Hospitals are considered to be a primary route of disease transmission. That is why patient rooms, operating rooms, and waiting areas should be disinfected regularly and thoroughly - and not just during the coronavirus pandemic. At the virtual.MEDICA trade fair, ICA Traffic GmbH will showcase the HERO21 robot, a disinfection unit that uses UVC radiation.
Read more
Image: Microscope next to a screen showing pictures of bacteria cultures; Copyright: PantherMedia/shmeljov

Laboratory safety: infection prevention in the work area

01.04.2020

What goes in, must not come out - and must also not cause harm to anyone working inside the lab. That's perhaps a nice way of summing up "laboratory safety" in one sentence - at least wherever pathogens are handled in biological and medical settings. The necessary laboratory safety precautions primarily depend on what is waiting "inside".
Read more
Image: A researcher sits at a laboratory bench and puts gloves at his hands; Copyright: PantherMedia/dragana.stock@gmail.com

The safe laboratory – protection through technology

01.04.2020

When biomedical researchers or diagnosticians work with potentially contagious materials like cell cultures, blood or tissue, they need absolute protection from pathogens. Both safety measures in the workspace and the correct tools and materials are key here. Learn in our Topic of the Month what is important for protection in the lab and what a safe laboratory looks like.
Read more
Image: Preview picture of video

Disinfection methods of hospital drinking water - Fully automatic legionella prevention

31.03.2020

Besides hand hygiene, drinking water hygiene is also on the to-do list of every hospital. A lot of money is invested to clean water pipes and to destroy legionella germs. An alternative solution for mechanical and thermal control is water disinfection using an automatic machine.
Read more
Image: UV Visual Lift; Copyright: by UVentions

by UVentions

Hygiene: Smart protection against pathogens like the coronavirus

23.03.2020

Germs such as bacteria, viruses or pathogenic fungi can spread from one person to another through direct contact when we shake hands or touch objects. People touch door handles and push elevator buttons in public places and constantly move in and out of spaces. Regular manual high-level disinfection is practically impossible. UVentions GmbH has found an intelligent solution for this problem.
Read more
Image: Preview picture of video

Hightech solutions for hygiene, disinfection and sterilisation

21.11.2019

Hightech solutions for hygiene in the medical sector have been getting better and faster. There are not only machines that can disinfect everything by themselves, but there are portable and handy sterilisation solutions as well. At MEDICA 2019 you can find everything that is up-and-coming around medical hygiene.
Read more