Rolf Müller/Universitätsklinikums Bonn (UKB)
VIRTOSHA: Training in surgery using VR technology
13.09.2024
A research team from Bonn University Hospital, Cologne University of Applied Sciences and other partners is working on the VIRTOSHA project, which is developing a virtual reality training environment for surgical procedures.
University of Stuttgart, Institute for Artifical Intelligence
Robotics Institute Germany: Progress through AI-based robotics
29.08.2024
The newly founded Robotics Institute Germany (RIG) has started its work. The aim of the consortium, led by the Technical University of Munich (TUM) and the Karlsruhe Institute of Technology (KIT), is to establish Germany as the world's leading location for AI-based robotics. The project is being funded by the Federal Ministry of Education and Research with 20 million euros.
Gastrointestinal diagnostics: The Sonopill and AutoCapsule projects
29.08.2024
Capsule endoscopy has revolutionized gastrointestinal tract diagnosis over the past decade. The Sonopill program, led by Professors Marc Desmulliez and Sandy Cochran, is at the forefront of integrating ultrasound imaging and therapy into capsule technology.
Andreas Heddergott / TUM
GARMI: Assistance robot with diverse capabilities
18.07.2024
Care robot GARMI from the Technical University of Munich (TUM) is becoming increasingly versatile and intelligent. It combines various skills, supports people in their everyday lives and enables telemedical examinations.
Andreas Heddergott / TUM
Transmitting the sense of touch over the internet: new HCTI standard
25.06.2024
The Technical University of Munich (TUM), in collaboration with an international consortium, has released the "Haptic Codecs for the Tactile Internet" (HCTI) standard after eight years of work. This standard enables the transmission of the sense of touch over the Internet, similar to JPEG for images or MP3 for audio.
LMU Klinikum
Make way for rolling assistants! More robotics within hospital logistics
11.06.2024
Increasingly, hospitals are faced with the task of working efficiently despite staff shortages and cost pressure. Increasing automation, which is already widespread in other sectors, could offer solutions. While attention on medical robotics has been focused primarily on highly specialized tasks in the operating theatre, handling logistical tasks in hospitals is becoming increasingly important.
Messe Düsseldorf/Andreas Wiese
World Laboratory Day: Laboratory medicine in transition
16.04.2024
World Laboratory Day takes place annually on April 23. It is intended to draw attention to the work in laboratories and the achievements of laboratory employees. MEDICA-tradefair.com takes the day as an opportunity to highlight current trends that continue to shape these work environments. These trends will also be a main focus of the MEDICA LABMED FORUM at MEDICA 2024.
CHUM
Liver cancer treatment: Utilizing magnetic field-guided microrobots
12.04.2024
A new medical technique utilizing magnet-guided microrobots for treating liver tumors has been developed by a Canadian research team, offering a potential new approach in oncology.
Advancing surgical precision: ROSA shoulder system
18.03.2024
Zimmer Biomet, a leading medical technology company, has achieved a significant milestone with the FDA clearance of its ROSA Shoulder System for robotic-assisted shoulder replacement surgery. This innovation marks the world's first robotic surgery system specifically designed for shoulder replacement procedures.
Improving rehabilitation with self-stabilizing exoskeletons
14.03.2024
Exoskeletons offer a versatile tool for rehabilitation by providing assistance and targeted support for individuals with mobility challenges. They facilitate early mobilization, which is crucial to prevent complications associated with prolonged bed rest. By allowing patients to stand and walk with support, exoskeletons contribute to faster recovery and improved overall well-being.
Andreas Schmitz/TU Munich
Hand prostheses: AI enables more intuitive use
05.03.2024
Previous robotic prostheses only respond to their users' movement intentions to a limited extent. A new control method being developed at the TU Munich could help: A network of 128 sensors and the use of artificial intelligence could allow people to control their prosthetic hands more intuitively and naturally.
Technological solutions to combat the chronic staff shortage
04.03.2024
The shortage of skilled workers is a far-reaching challenge, especially in the healthcare sector. At MEDICA 2023, we were on the lookout for creative solutions.
Assistance technologies for the care sector
05.02.2024
The care sector is facing major challenges: Demographic change, the shortage of skilled workers and the physical demands of the profession will make it increasingly difficult to maintain good care in the future. The CareTech OWL research network at Bielefeld University aims to find solutions to this.
DragonImages
Exoskeletons in the operating room
16.01.2024
Exoskeletons have made their way into the workforce. With their capability to relieve muscles while still maintaining agility, they make a welcome support for employees across industries. In the medical sector, exoskeletons are mostly being used for rehabilitation. But there is a field of use that could benefit from exoskeletons in the future: the operating room.
University of Twente
Miniature marvels: wireless millirobots successfully navigate arteries
18.12.2023
For the first time ever, wireless millirobots navigated a narrow blood vessel both along and against arterial flow. Researchers from the University of Twente and Radboudumc inserted the screw-shaped robots in a detached aorta with kidneys where they controlled them using a robotically controlled rotating magnet.
Fraunhofer IPA
DAIOR research project: Distributed AI improves telesurgery
14.12.2023
In the DAIOR research project, doctors and technicians are working on the evaluation of surgical data from multimodal sources using artificial intelligence (AI). One of the project goals is to support robot-assisted telesurgery in real time.
3D printing on the assembly line – iFactory 3D GmbH
16.11.2023
3D printing enables the individual production of single pieces and small series at low cost. However, it also has a disadvantage: printing takes a relatively long time and it is not possible to produce several pieces in succession with a single printer. At the MEDICA START-UP PARK at MEDICA 2023, we met a company that automates 3D printing. Find out how in the interview with iFactory 3D GmbH.
Precision sensing technology for enhanced sleep quality – Earable
16.11.2023
A good night’s sleep is a personal experience. The FRENZ Brainband by Earable is a wearable driven by AI, designed to cater to your unique sleep requirements. It combines real-time data analysis, intelligent audio content, and cutting-edge technology to ensure users are well-rested. We did not want to miss the chance to talk to Earable about their newest developments.
Innovative and accessible exoskeleton development – Project MARCH
15.11.2023
Project MARCH, a student team from TU Delft, is developing exoskeleton technology to improve the lives of people with paraplegia. Through an interdisciplinary approach and a commitment to innovation, they create designs that combine advanced technology with practical functionality. As they came to MEDICA 2023 as an exhibitor, we took the opportunity to interview them.
On the move at MEDICA 2023 – PHYSIO TECH highlight tour
15.11.2023
PHYSIO TECH is one of the five Spheres of MEDICA. Here, visitors will find products and exhibitors relating to physiotherapy, rehabilitation and sport – in other words, everything that keeps people fit and moving. But this topic is no longer about colorful training aids made of plastic or rubber; smart applications and robotics have long since found their way here too.
ROBERT, the robot in rehab – Life Science Robotics
14.11.2023
At MEDICA 2023, the Danish company Life Science Robotics presents ROBERT. On the one hand, this robotic arm can relieve medical staff in rehabilitation and physiotherapy. On the other hand, it can also help patients achieve better results and get fit again faster. Find out how this works and what makes ROBERT so special in our video interview with Keld Thorsen, CEO.
Robotic assistance for safe patient positioning – with BizLink Robotic Solutions France
14.11.2023
Vincent Besnard, Software Development Manager, tells us about the recent developments in medical robotics from the point of view of BizLink. The company has been an expert for safe patient positioning during proton therapy for years now. At MEDICA 2023, they present their new robotic platform PULSAR.
Breath the spirit of MEDICA 2023 – Highlight tour with Director Christian Grosser
13.11.2023
Topics like artificial Intelligence, automation and robotics, and sustainability are shaking the medical industry – and both MEDICA and COMPAMED reflect that. We are walking through the trade show halls of MEDICA with Christian Grosser, Director Health & Medical Technologies at Messe Düsseldorf, to talk about this: What are his impressions of this year’s MEDICA and COMPAMED?
Chibelek
Funding partially autonomous surgical robotics development
09.11.2023
The research association ForNeR’s two million euro grant from the Bavarian Research Foundation's Board of Trustees integrates assistive robots for surgery through intuitive interfaces in the operating room. This not only helps patients but also supports operating room staff in performing demanding procedures.
https://divr.de/
Training surgery with the DynamicHIPS system
06.11.2023
When surgically inserting an artificial hip, the preparation of medical staff jumps from theory to practice directly on the patient. The training system OrthoMiniGames now offers a simulation as an intermediate step. The use of virtual reality optics combined with tactile devices provides the opportunity to conduct the procedure within a haptic experience before approaching the patient.
TEDIRO
Rehabilitation: THERY robot accompanies gait training on forearm supports
25.10.2023
It is 1.50 meters tall, weighs 60 kilograms, can reach a maximum speed of 0.8 meters per second and is called THERY. THERY is a mobile robot from the Ilmenau-based company TEDIRO, which enables patients to complete autonomous gait training on forearm supports without the assistance of a therapist.
wosunan
Microrobots: opportunities for cancer treatment and wound healing
18.09.2023
A group of researchers at the Technical University of Munich (TUM) has developed the world’s first microrobot (“microbot”) capable of navigating within groups of cells and stimulating individual cells.
Gerain0812
Sensor-controlled precision: the future of surgical tumor removal
22.08.2023
The complete removal of malignant tumors is a decisive factor for the success of cancer treatment. Until now, the tissue examinations required for this have been time-consuming. In the future, sensor-based methods could come into play to help surgeons detect tumor boundaries more accurately and thus perform a more precise operation.
National University of Singapore
Nature-inspired pressure sensing technology aims to transform healthcare and surgical robots
22.08.2023
NUS researchers have developed 'eAir', an innovative pressure sensor inspired by the lotus leaf effect. This sensor could revolutionize minimally invasive surgeries by providing tactile feedback to surgeons and improve patient experiences in monitoring intracranial pressure. Its unique design enhances precision and reliability, potentially transforming various medical applications.
University Hospital Bonn (UKB)/Johann Saba
OR robotics: flexible on-demand robotics with Dexter
08.08.2023
Surgical robotics is precise and reduces the workload of surgeons. However, it is not always as flexible as humans. Dexter, a surgical robot that recently received CE certification, could revolutionize how surgery is performed in certain cases. Not only is it smaller and less expensive than other systems, it also allows switching between robotics and laparoscopy.
FAU/Georg Pöhlein
FAU: research project about robotic assistance systems receives funding
03.08.2023
In the “ForNeRo – Seamless and Ergonomic Integration of Robotics into the Clinical Workflow” research network, researchers from FAU and five other research institutions and five companies are developing methods for integrating robotic assistance systems for surgical applications using intuitive interfaces in the operating room.
Anna Schroll/Leibniz-HKI
Robotics: modular platform for antibiotics research
27.07.2023
The high cost and limited commercial value of new antibiotics discourage their development, as they are used sparingly to avoid resistance. To address this, a new robotics platform aims to simplify the development of active substances to combat the problem of antibiotic resistance. While we cannot always prevent resistance, this approach offers a promising solution.
Chalmers University of Technology
Bionic hand: surgical and engineering innovations enable unprecedented control
21.07.2023
For the first time, a person with an arm amputation can manipulate each finger of a bionic hand as if it was his own. Thanks to revolutionary surgical and engineering advancements that seamlessly merge humans with machines, this breakthrough offers new hope and possibilities for people with amputations worldwide.
1footage
Digitization, AI, robotics: how healthcare will change over the next 50 years
07.07.2023
A study by researchers at Mälardalen University (MDU) describes what our future healthcare industry may look like.
Pressmaster
AI supports rehabilitation after spinal cord injury
05.07.2023
An intelligent suit is hoped to significantly improve rehabilitation after a serious spinal cord injury. The AI-supported solution will be developed over the next three years by researchers from Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU) working in collaboration with Heidelberg University and Heidelberg University Hospital.
MPI-IS
Medical robot inspired by the pangolin
26.06.2023
Scientists at the Max Planck Institute for Intelligent Systems in Stuttgart have developed a magnetically controlled soft medical robot with a unique, flexible structure inspired by the body of a pangolin. The robot is freely movable despite built-in hard metal components.
Exoskeletons for everyday use: Non-invasive method for controlling prostheses
26.05.2023
Modern prostheses are already smart, but they still have their limits. The Assistive Intelligent Robotics Lab at FAU is therefore also researching an intuitive and non-invasive method for controlling prostheses. In our interview, those involved tell us exactly what they are working on together with neurologists and surgeons from the Erlangen University Hospital.
BarcelonaTech (UPC)
Low-cost robotic arm created by students as an alternative to conventional prostheses
25.05.2023
A low-cost robotic arm created by students as an alternative to conventional prostheses: The ARM2u biomedical engineering team, from the UPC’s Barcelona School of Industrial Engineering (ETSEIB), is working on new functions for their low-cost 3D-printed transradial prosthesis.
Cyborg and Bionic Systems
Novel robotic bronchoscope system for navigation and biopsy of pulmonary lesions
19.04.2023
A novel robotic bronchoscope system can non-intrusively access the area of interest within the lung for minimally invasive pulmonary lesions sampling, the gold standard of lung cancer diagnoses.
Petra Ritter/BIH
European test infrastructure for AI and robotics in healthcare
09.03.2023
The Fraunhofer Heinrich-Hertz-Institut (HHI) is part of the EU project TEF-Health (Testing and Experimentation Facility for Health AI and Robotics), which aims to establish a test infrastructure for artificial intelligence (AI) and robotics in healthcare.
svitlanah
HEARO cochlear implantation – microsurgery via robot
27.02.2023
Until now, robots have assisted surgeons in the operating room to enhance their capabilities. CASCINATION is a Swiss medical device company who has teamed up with MED-EL – the Innsbruck-based hearing implant company – to develop a system that can perform an autonomous cochlear implantation. Since then, HEARO has been successfully used – including at the Medical University of Vienna (MedUniWien).
GabiStock
ENT surgery – Interventions for speech and hearing
27.02.2023
Speaking and hearing are the two most important abilities that connect humans to their environment. If they get limited through disease or injury, it is all the more important to restore them as broadly as possible. Depending on the cause for their limitation, there are different surgical treatment possibilities. We take a look at current methods in our Topic of the Month.
stevanovicigor
ENT surgery: minimally invasive and robot-assisted procedures
27.02.2023
The ear, nose and throat are full of tiny structures, and each plays an important role in the health of a person. The inside of the ears makes it possible for us to hear, while the inside of our nose enables us to smell. The larynx contains the vocal cords, which allow us to speak and stay connected to the outside world.
Nanyang Technological University
AI-powered massage robot to start product evaluation in the US, clinical trial in Singapore
20.02.2023
Singapore robotics firm AiTreat will be embarking on a new product evaluation in the United States for their massage robot powered by Artificial Intelligence (AI) at Mayo Clinic, USA.
Klinikum Oldenburg
Training: Learning to recognize delirium with the android patient
10.02.2023
Current patient simulators are mostly mannequins that can simulate vital functions via built-in electronics but are otherwise lifeless. An android patient could bring a breath of fresh air to training in the future. It can help hospital staff to better recognize delirium in patients and thus increase patient safety.
AG Klinische Neurotechnologie, Charité Berlin
Controlling neural exoskeletons more precisely with diamond sensors
02.02.2023
In the recently launched NeuroQ lighthouse project, the project partners develop highly sensitive diamond-based quantum sensors that will enable paralyzed people to control neural exoskeletons more precisely.
Petra Ritter / BIH
€60 million committed to establish AI and robotics in healthcare
11.01.2023
The EU project TEF-Health aims to test and validate innovative artificial intelligence (AI) and robotics solutions for the healthcare sector and accelerate their path to market.
beta-web/Roth
Wound treatment: printing instead of grafting
01.12.2022
Currently, wound care is limited to either waiting for wounds to heal while keeping them clean and free of infection or using grafts from the patient’s own body to cover larger defects. With the ongoing development tissue engineering and bioprinting, there could be a third option in future: Will we be able to print new tissue directly in the OR to cover surgical wounds?
Robots – helping hand in the hospital
17.11.2022
Robots have already been part of our everyday live for some time now, whether in our private life or at many workplaces. But how can the automatic helpers be helpful as an assistant in everyday hospital life? We got to know some great ideas at MEDICA 2022.
Helpful hands redefined – Stäubli Tec-Systems GmbH
16.11.2022
Medical robots are on the advance: Highly precise, rigid or flexible, they also have to meet the criteria for sterile surgical conditions. At MEDICA 2022, we visit the stand of Stäubli Tec Systems and see for ourselves why robots can be the helping hand of surgeons.
Home for medical technology – Highlight tour at the joint stand of NRW
16.11.2022
North Rhine-Westphalia offers good conditions as a location for medical technology companies. We spoke to Refined Laser Systems GmbH, United Robotics Group GmbH and weLLgo Medical Products GmbH during our tour of the NRW joint stand in Hall 3 / C80.
LightFieldStudios
Smart surgery, endoscopy, robotics: rethought and optimized for the times
04.10.2022
Overall technical progress does not stop at the operating rooms of this world. Whether it's completely new ideas or robotic optimizations of classic methods – research teams are coming up with contemporary answers to long-standing questions using the diverse possibilities of the present day.
Madeleine Waltner
Actuators, sensors, controllers: The robot-assisted flexible endoscope combines all three
04.10.2022
The rise of robotics in medicine will result in more applications in this sector in the future. This necessitates the design of robotic systems that meet the requirements for the respective medical implementation. Scientists at the Institute of Medical Device Technology at the University of Stuttgart are developing the systems, components, sensors, and control technology to meet this demand.
GabiStock
Body follows head: Bridging the gap between rigid and flexible endoscopes
04.10.2022
A successful endoscopic intervention hinges on two key factors: the endoscope must have excellent maneuverability and high structural rigidity. Unfortunately, today's devices cannot meet both requirements at the same time. Tim-Lukas Habich wants to change that by bridging the gap between flexible and rigid robots.
tridsanu
Accessing the surgical area: Digitization is coming to the OR
01.10.2022
Innovative medical technology is driving the digitization of healthcare institutions and is opening a world of possibilities. This is especially the case for minimally invasive robotic-assisted surgery.
WWU - Peter Leßmann
First completely robot-supported microsurgical operations on humans
24.08.2022
A team led by Dr. Maximilian Kückelhaus and Prof. Tobias Hirsch from the Centre for Musculoskeletal Medicine at the University of Münster has carried out the first completely robot-supported microsurgical operations on humans.
karrastock
Disinfection: Solutions to stop pathogens from spreading
02.05.2022
Disinfection and sterilization are the most reliable and best way to ensure patient safety in healthcare settings. Whether it is at the point of care when the patient is either at the hospital or medical practice, or wherever medical devices are manufactured and packaged in a sterile environment – the transmission of pathogens and microorganisms can have severe health impacts.
Fraunhofer IST/Paul Kurze
Cold plasma: Contactless disinfection of surfaces
02.05.2022
One of the most time-consuming tasks in hospitals is the manual cleaning and disinfection of high touch points and surfaces such as door handles, buttons, and switches. These are areas where microorganisms are spread by direct skin contact. The “MobDi – Mobile Disinfection” research project is developing a robot that automatically cleans and disinfects these areas. It will use cold plasma.
PantherMedia/Andriy Popov
Telemedicine as an alternative: contactless and secure diagnoses
01.04.2022
Concrete diagnoses are the be-all and end-all in medicine. The Corona pandemic made the conditions for good diagnostics more difficult. Telemedicine offers an alternative - not only in times of pandemic. It is important to exploit the full potential of technical possibilities. Robot-assisted examinations and artificial intelligence can make an important contribution to symptom recognition.
Reactive Robotics
Robotics in Intensive Care Units: "Stand Patients up on Their Feet and Let Them Walk"
04.01.2022
Robotics have made their way into many areas in healthcare. So far, intensive care units had not utilized robotic systems. Now there is an application that facilitates ICU care tasks.
Digital and automated laboratory – Robots as multifunctional helpers
26.11.2021
A lot of laboratory tasks require high precision on one hand, on the other they tend to be repetitive and tiring. While humans can only work for a limited time here while staying effective, robots are able to work without taking a break. The start-up bAhead wants to make collaborative robots, CoBots, adaptable helpers with the help of AI. We learn more from CEO & Founder Rainer Treptow.
The laboratory industry between Corona and AI
17.11.2021
The laboratory industry is currently in commotion: the whole world is watching when it comes to news from the Corona pandemic. But tests and the sequencing of new variants are not the only stress factors: robotics, networking and AI are finding their ways into laboratories and turn existing processes upside down. We talked to some of the exhibitors at MEDICA 2021 about this.
Precision work in the operating room – Minimally invasive surgery at MEDICA 2021
16.11.2021
The smaller the surgery, the more precise it has to be. That's why surgeons need high-precision technology for minimally invasive procedures. Robots are often already used in the OR to perform surgery with millimeter precision. At MEDICA 2021, we learn more about the status quo of technology that enables minimally invasive procedures.
Image: The KUKA robot sorts blood samples according to the color of their cap; Copyright: LT Automation
Fast, accurate, automatic: Simplifying workflows with laboratory robots
01.10.2021
Unpacking and sorting of blood samples from general practitioners is a monotonous and time-consuming task. The Aalborg University Hospital has now automated the process: Up to 3000 blood samples every day are unpacked and sorted by two lab robots provided by LT Automation. Furthermore, the samples are temperature monitored and tracked, using the Intelligent Transport Boxes.
Kessler Foundation
High-dose gait training with robotic exoskeleton after acute stroke
09.08.2021
Preliminary findings by Kessler researchers show that the use of a robotic exoskeleton during inpatient rehabilitation for acute stroke may improve function. Gait training in the robotic exoskeleton can provide high-dose therapy soon after stroke, when it is likely to have its maximal effect on functional ambulation.
Universitätsklinikum Freiburg 2021
Bringing stents precisely to their destination with cardiac catheter robots
02.08.2021
Robots in the operating theatre are no longer a rarity in certain medical fields - they support and relieve doctors and sometimes they can make operations more efficient and easier with artificial intelligence (AI). However, they are rarely found in the operating theatre during cardiological interventions.
Mobile hygiene robot in the hospital – The cleaning force of the future
25.05.2021
One of the most time-consuming tasks in a hospital is the disinfection of often-used surfaces like light switches or door handles. This is especially important during the corona pandemic. The "DeKonBot" by Fraunhofer IPA could support hospital staff here in the future. Learn in our video interview with Dr. Birgit Graf how the robot works.
Hip replacement: virtual surgical training with haptic technology
01.04.2021
Surgeons have only limited options to practice surgical techniques before they enter the operating room. The implantation of an endoprosthesis requires extensive practical training since it necessitates strength and utmost precision. The "Dynamic HIPS" project develops a virtual reality hip implant simulator that provides realistic haptic feedback.
PantherMedia/ekkasit919
Exploring possible applications of robotic surgery
09.03.2021
Robotics has been gaining importance in many areas of life for years, not least in medicine. Robots are already being used in the operating room today, but they do not always play the leading role – a circumstance that will certainly change in the long term.
Necessity is the mother of invention – innovations in the corona pandemic
01.03.2021
Keeping your distance, washing your hands, wearing a mask – such protective measures have been the order of the day since the SARS-CoV-2 pandemic began. But appropriate products or procedures are not suitable for everyone, are often unavailable or, despite everything, carry a residual risk. The need for new, better solutions is high. But necessity is the mother of invention.
Fraunhofer IPA
Alone in the lab – robot Kevin relieves the staff
08.12.2020
If Kevin was alone in the lab at night, the next morning, the workers will not find chaos, but labeled tubes and prepared samples. Kevin is a laboratory robot developed by Fraunhofer IPA to relieve the strain on laboratory workers so that they can concentrate on the essentials: research and diagnostics.
Robotic arms in the operating room – When the surgeon can work in a sitting position
23.11.2020
Surgeons do not only need much concentration, but also strength and endurance. Robotic arms under their control can do part of this work. Prof. (Saitama Med. Univ.) Dietmar Stephan from the St. Marien Hospital Siegen describes in our video, how controls and haptic feedback can make surgery with a robot easier.
Disinfection: a robot nips viruses in the bud
02.11.2020
Hospitals are considered to be a primary route of disease transmission. That is why patient rooms, operating rooms, and waiting areas should be disinfected regularly and thoroughly - and not just during the coronavirus pandemic. At the virtual.MEDICA trade fair, ICA Traffic GmbH will showcase the HERO21 robot, a disinfection unit that uses UVC radiation.
The digital hospital: integration and digitization
01.10.2020
Whether it's process automation, robotics in the OR and nursing areas, or the digitalization of patient records - in a smart hospital, everything comes together to form a connected hospital. Find out exactly how the Smart Hospital is being developed with the help of information platforms and projects in the Topic of the Month.
Smartlab – Robotics and automation in the laboratory
15.09.2020
Some tasks in the laboratory are repetitive, need to be done extremely precise and require a lot of time. Such tasks are very tedious for humans, but they are tailor-made for robots. Such is the case with the "AutoCRAT" project at the Fraunhofer Institute for Production Technology IPT in Aachen. Here, a robotic platform is developed to produce stem cells for the treatment of osteoarthritis.
The laboratory 4.0: networked analyses
01.09.2020
There is likely no other branch of medicine where you can find as many high-tech devices as in modern laboratories. A major part of diagnostic and biomedical research is done here. A lot of individual steps in work processes need to be followed precisely to ensure the results’ quality. Also, a lot of data is generated here.
Augmented Reality for better laboratory results
01.09.2020
Accuracy is paramount in laboratory settings and ensures that lab results are valid. Errors in a lab can render series of tests unusable and waste precious time and money. In the medical realm, this might even result in clinical trial errors. Augmented reality (AR) can help laboratory technicians to prevent errors and guide their work in the future.
Stroke therapy of the future: Stimulating entire networks
19.08.2020
The Neurological University Hospital in Tübingen is a world leader in research on TMS (Transcranial Magnetic Stimulation). In this report you will learn how the stroke therapy, which is always complemented by physiotherapeutic treatment, is being developed from a punctual to an entire network treatment in the brain.
Innovative Robotic-Assisted Surgical Systems
04.05.2020
More compact, more flexibility, and more precision - these are the main characteristics developers strive for as they advance robotic-assisted surgical systems for the operating room. Several technology providers have already shown how it’s done, including the makers of the popular daVinci Surgical System. Yet for robotic-assisted systems, the sky is the limit.
Robotics in the OR: Relieving the surgeon
04.05.2020
In the operating room, minimally invasive procedures are increasingly used. Robot-assisted systems are a great help for the surgeon. They support the surgeon and are extremely precise. Through innovative research approaches, robotic systems are constantly evolving.
Robots in the Operating Room: Improving Training and Safety
04.05.2020
Surgical robots are transforming the operating room. They deliver many benefits but also present new challenges. That is why the efficient handling of robotic mechanisms must also be reflected in the respective training courses.
Robotic-Assisted Surgery with the daVinci-System
04.05.2020
Robotic surgical systems are often used to perform minimally invasive procedures. The daVinci surgical system is still one of the market leaders and is especially well suited to perform prostatectomies, a surgical option for prostate cancer.
Endoprosthetic surgery: modern and traditional approaches
01.01.2020
Surgery is required if you need an artificial joint. Patients and doctors must select the type of surgery that’s best suited and choose between robot-assisted, traditional or minimally invasive surgical approaches. Post-operative risks should be kept to a minimum, while benefits should outweigh any possible complications.
Estera Kluczenko
Robotics: an avatar to end loneliness
18.12.2019
A child who has to miss many days of school due to long-term illness? An older adult living alone or in a nursing home? The Norwegian startup No Isolation believes that nobody should have to experience social isolation, no matter how old you are. The company uses technology to help combat loneliness.
Hightech solutions for hygiene, disinfection and sterilisation
21.11.2019
Hightech solutions for hygiene in the medical sector have been getting better and faster. There are not only machines that can disinfect everything by themselves, but there are portable and handy sterilisation solutions as well. At MEDICA 2019 you can find everything that is up-and-coming around medical hygiene.
Robot assisted hippotherapy – Interview with intelligent motion GmbH
20.11.2019
Nobody will expect to meet horses at MEDICA. Even though, visitors can learn more about hippotherapy that is aimed at patients with neurological deficits – for example through MS or in rehabilitation after stroke. Better yet, they can take a seat at a horseback themselves. This is possible thanks to “hirob” here at the stand of the intelligent motion GmbH from Austria.