Hygiene and sterilization: Hightech for clean surfaces -- MEDICA - World Forum for Medicine

Image: Top-down picture of a group of physicians who stand in a circle and put the hands together in the center; Copyright: dolgachov

dolgachov

World Hand Hygiene Day 2022: United for Safety

05/05/2022

While the main focus of infection prevention in healthcare remains on the Corona virus, other pathogens must not be forgotten about it. In particular, pathogens with resistance to drugs can have serious consequences.
Read more
Image: a clean room of SOMI medical, in the rear area is an employee sitting, in the front area is a filled storage rack; Copyright: SOMI medical GmbH

SOMI medical GmbH

Production hygiene: the packaging process from warehouse to logistics

02/05/2022

Applications of telemedicine surged in popularity in efforts to reduce the COVID-19 infection risk for both medical professionals and patients. Unfortunately, the services typically lack a proper diagnostic option.
Read more
Image: Cleaning staff at a hospital is wiping the floor of an OR; Copyright: karrastock

karrastock

Disinfection: Solutions to stop pathogens from spreading

02/05/2022

Disinfection and sterilization are the most reliable and best way to ensure patient safety in healthcare settings. Whether it is at the point of care when the patient is either at the hospital or medical practice, or wherever medical devices are manufactured and packaged in a sterile environment – the transmission of pathogens and microorganisms can have severe health impacts.
Read more
Image: Black, box-like device that directs a small, blue flame towards a light switch; Copyright: Fraunhofer IST/Paul Kurze

Fraunhofer IST/Paul Kurze

Cold plasma: Contactless disinfection of surfaces

02/05/2022

One of the most time-consuming tasks in hospitals is the manual cleaning and disinfection of high touch points and surfaces such as door handles, buttons, and switches. These are areas where microorganisms are spread by direct skin contact. The “MobDi – Mobile Disinfection” research project is developing a robot that automatically cleans and disinfects these areas. It will use cold plasma.
Read more
Image: A room in a hospital with white floor, ceiling, walls and cabinets; Copyright: Prostock-studio

Prostock-studio

Hygiene and sterilization: Hightech for clean surfaces

02/05/2022

Due to the Corona pandemic, a lot of attention is currently focused on the protective effect of medical masks. But especially in medical work areas, the protection against aerosol transmission is not enough, because a lot of pathogens can be transmitted trough direct contact with people or surfaces. Hygienic measures against contact infections like these are very costly, though.
Read more
Image: Surgeon is inserting a heart catheter into a patient’s body; Copyright: PantherMedia/fly_wish

Single-use catheter reprocessing in electrophysiology

01/03/2022

Catheter ablation is a way to treat irregular heartbeats, or arrhythmias, like atrial fibrillation. Although catheters are classified as single-use or disposable devices, the complex instruments can be reused multiple times thanks to extensive reprocessing.
Read more
Image: A long hallway in a hospital with a lot of doors; Copyright: PantherMedia/dlpn

Disinfection: antibacterial coating on surfaces in the ICU

01/03/2021

All hospitalized patients are susceptible to contracting a nosocomial infection, with ICU patients being particularly at risk. The effects of these hospital-acquired infections are often more dangerous than the original reason for the in-patient hospitalization. The "PACMAN" project is now testing an antimicrobial coating for frequently used contact surfaces at high risk of pathogen transmission.
Read more
Image: A hospital employee is cleaning an endoscope; Copyright: PantherMedia/sielemann

PantherMedia/sielemann

Medical devices: hygienic design combats pathogens

03/02/2021

Medical hygiene does not just play a key role during the COVID-19 pandemic. Preventing the transmission of infectious diseases and especially the spread of multidrug-resistant organisms is paramount even in non-pandemic times. While hygiene practices in hospitals and medical offices are essential, the industry can also make an important contribution with hygienic product design.
Read more
Image: Head of a mannequin with transparent face shield and surgical mask; Copyright: Messe Düsseldorf/Achim Wiese

virtual.MEDICA 2020: Experience medicine online

02/11/2020

This year is completely different! Normally, we would offer you an advanced peek into the MEDICA’s halls in Dusseldorf at this point. But due to the corona pandemic, the trade fair takes place online as virtual.MEDICA. We nevertheless took a look at this year’s topics of special interest.
Read more
Image: A blue, box-shaped device with a handle and a nozzle; Copyright: 99Technologies S.A.

Disinfection: let mist do the work

02/11/2020

Healthcare settings require sharp weapons to fight both hospital-acquired infections and pathogens like SARS-CoV-2. Besides protective equipment, regular room disinfection is one of them. But they require time and are also prone to error if done manually. Fully automated solutions are needed to relief hospital staff from this exhausting work and perform it reliably. So, why not fog the room?
Read more
Image: Microscope next to a screen showing pictures of bacteria cultures; Copyright: PantherMedia/shmeljov

Laboratory safety: infection prevention in the work area

01/04/2020

What goes in, must not come out - and must also not cause harm to anyone working inside the lab. That's perhaps a nice way of summing up "laboratory safety" in one sentence - at least wherever pathogens are handled in biological and medical settings. The necessary laboratory safety precautions primarily depend on what is waiting "inside".
Read more
Image: Researcher with gloves and protective suit is working at a microscope; Copyright: PantherMedia/EvgeniyShkolenko

BSL-4 laboratories: highest levels of safety and protection

01/04/2020

Laboratories are sectioned into four biosafety levels to dictate the precautions required to isolate dangerous biological agents. The highest level of biological safety, BSL-4, is perhaps the most well-known when we think of containing pathogens and microbes. However, the fewest number of laboratories actually fall into the BSL-4 category.
Read more
Image: A researcher sits at a laboratory bench and puts gloves at his hands; Copyright: PantherMedia/dragana.stock@gmail.com

The safe laboratory – protection through technology

01/04/2020

When biomedical researchers or diagnosticians work with potentially contagious materials like cell cultures, blood or tissue, they need absolute protection from pathogens. Both safety measures in the workspace and the correct tools and materials are key here. Learn in our Topic of the Month what is important for protection in the lab and what a safe laboratory looks like.
Read more
Image: Female hospital employee with green OR cap is wearing AR glasses, a screen is floating in front of her; Copyright: IT4process GmbH

IT4process GmbH

Augmented Reality: supporting sterile processing services?

08/06/2018

Every day, hospital staff has to manage complex processes to guarantee quality and patient safety. Yet in some areas, the use of checklists and manuals tends to be more cumbersome and not useful – as is the case in sterile processing. A new project studies how augmented reality can take all the necessary information into the staff's field of view.
Read more