Tom Bauer |TU Braunschweig
Architecture rather than antibiotics: patient room takes center stage
01/07/2022
Hospitals take many precautions – including hygiene concepts – to prevent the spread of infection but are still unable to eliminate all pathogens. Since 2016, an interdisciplinary research team has been studying how architecture and design can help prevent the spread of highly infectious and multidrug-resistant pathogens as part of the KARMIN project.
dolgachov
World Hand Hygiene Day 2022: United for Safety
05/05/2022
While the main focus of infection prevention in healthcare remains on the Corona virus, other pathogens must not be forgotten about it. In particular, pathogens with resistance to drugs can have serious consequences.
karrastock
Disinfection: Solutions to stop pathogens from spreading
02/05/2022
Disinfection and sterilization are the most reliable and best way to ensure patient safety in healthcare settings. Whether it is at the point of care when the patient is either at the hospital or medical practice, or wherever medical devices are manufactured and packaged in a sterile environment – the transmission of pathogens and microorganisms can have severe health impacts.
Prostock-studio
Hygiene and sterilization: Hightech for clean surfaces
02/05/2022
Due to the Corona pandemic, a lot of attention is currently focused on the protective effect of medical masks. But especially in medical work areas, the protection against aerosol transmission is not enough, because a lot of pathogens can be transmitted trough direct contact with people or surfaces. Hygienic measures against contact infections like these are very costly, though.
Fraunhofer IST/Paul Kurze
Cold plasma: Contactless disinfection of surfaces
02/05/2022
One of the most time-consuming tasks in hospitals is the manual cleaning and disinfection of high touch points and surfaces such as door handles, buttons, and switches. These are areas where microorganisms are spread by direct skin contact. The “MobDi – Mobile Disinfection” research project is developing a robot that automatically cleans and disinfects these areas. It will use cold plasma.
SOMI medical GmbH
Production hygiene: the packaging process from warehouse to logistics
02/05/2022
Applications of telemedicine surged in popularity in efforts to reduce the COVID-19 infection risk for both medical professionals and patients. Unfortunately, the services typically lack a proper diagnostic option.
felipecaparros
Technology transfer award for PCR rapid test device for infection diagnostics
25/04/2022
Spindiag GmbH, together with the University of Freiburg and the Hahn-Schickard-Gesellschaft für angewandte Forschung e.V., was awarded the Technology Transfer Prize 2020 from the German Physical Society (DPG) on April 09, 2022 for the development of the PCR-based rapid test system Rhonda.
Disinfection: antibacterial coating on surfaces in the ICU
01/03/2021
All hospitalized patients are susceptible to contracting a nosocomial infection, with ICU patients being particularly at risk. The effects of these hospital-acquired infections are often more dangerous than the original reason for the in-patient hospitalization. The "PACMAN" project is now testing an antimicrobial coating for frequently used contact surfaces at high risk of pathogen transmission.
Necessity is the mother of invention – innovations in the corona pandemic
01/03/2021
Keeping your distance, washing your hands, wearing a mask – such protective measures have been the order of the day since the SARS-CoV-2 pandemic began. But appropriate products or procedures are not suitable for everyone, are often unavailable or, despite everything, carry a residual risk. The need for new, better solutions is high. But necessity is the mother of invention.
Hygiene and disinfection: innovations against Covid-19
01/03/2021
When urgently needed products such as masks become scarce or conventional disinfection processes reach their limits, inventiveness is called for. And there is usually plenty of it in times of crisis. What innovations has the current corona pandemic already produced? How can they supplement or even replace existing products and processes?
PantherMedia/sielemann
Medical devices: hygienic design combats pathogens
03/02/2021
Medical hygiene does not just play a key role during the COVID-19 pandemic. Preventing the transmission of infectious diseases and especially the spread of multidrug-resistant organisms is paramount even in non-pandemic times. While hygiene practices in hospitals and medical offices are essential, the industry can also make an important contribution with hygienic product design.
Disinfection: a robot nips viruses in the bud
02/11/2020
Hospitals are considered to be a primary route of disease transmission. That is why patient rooms, operating rooms, and waiting areas should be disinfected regularly and thoroughly - and not just during the coronavirus pandemic. At the virtual.MEDICA trade fair, ICA Traffic GmbH will showcase the HERO21 robot, a disinfection unit that uses UVC radiation.
Disinfection: let mist do the work
02/11/2020
Healthcare settings require sharp weapons to fight both hospital-acquired infections and pathogens like SARS-CoV-2. Besides protective equipment, regular room disinfection is one of them. But they require time and are also prone to error if done manually. Fully automated solutions are needed to relief hospital staff from this exhausting work and perform it reliably. So, why not fog the room?
Sustainable Nonwoven Solutions Improve Hygiene
02/11/2020
Whether it is hospitals or care homes - the right hygiene tools are crucial for process efficiency. These products can be composed of a wide variety of materials. NORAFIN offers a sustainable solution with products made from nonwoven fabric.
BSL-4 laboratories: highest levels of safety and protection
01/04/2020
Laboratories are sectioned into four biosafety levels to dictate the precautions required to isolate dangerous biological agents. The highest level of biological safety, BSL-4, is perhaps the most well-known when we think of containing pathogens and microbes. However, the fewest number of laboratories actually fall into the BSL-4 category.
The safe laboratory – protection through technology
01/04/2020
When biomedical researchers or diagnosticians work with potentially contagious materials like cell cultures, blood or tissue, they need absolute protection from pathogens. Both safety measures in the workspace and the correct tools and materials are key here. Learn in our Topic of the Month what is important for protection in the lab and what a safe laboratory looks like.
Laboratory safety: infection prevention in the work area
01/04/2020
What goes in, must not come out - and must also not cause harm to anyone working inside the lab. That's perhaps a nice way of summing up "laboratory safety" in one sentence - at least wherever pathogens are handled in biological and medical settings. The necessary laboratory safety precautions primarily depend on what is waiting "inside".
by UVentions
Hygiene: Smart protection against pathogens like the coronavirus
23/03/2020
Germs such as bacteria, viruses or pathogenic fungi can spread from one person to another through direct contact when we shake hands or touch objects. People touch door handles and push elevator buttons in public places and constantly move in and out of spaces. Regular manual high-level disinfection is practically impossible. UVentions GmbH has found an intelligent solution for this problem.
IT4process GmbH
Augmented Reality: supporting sterile processing services?
08/06/2018
Every day, hospital staff has to manage complex processes to guarantee quality and patient safety. Yet in some areas, the use of checklists and manuals tends to be more cumbersome and not useful – as is the case in sterile processing. A new project studies how augmented reality can take all the necessary information into the staff's field of view.