12/04/2021KAIST researchers have developed a novel nanofiber production technique called ‘centrifugal multispinning’ that will open the door for the safe and cost-effective mass production of high-performance polymer nanofibers.
09/04/2021Due to the high user frequency, the hygienization of touch displays of vending machines represents a potential hazard for the transmission of germs. The "CleanScreen" project, funded by the Federal Ministry for Economic Affairs and Energy (BMWi), now aims to find a remedy.
08/04/2021A study published in the Journal of Occupational and Environmental Medicine from researchers at Henry Ford Health System has found that Henry Ford's early implementation of a universal mask policy in the COVID-19 pandemic was associated with reducing the risk of healthcare workers at Henry Ford acquiring COVID-19.
06/04/2021A new mathematical model suggests that the easing of lockdown must be accompanied by wider and more effective use of control measures such as facemasks even with vaccination, in order to suppress COVID-19 more quickly and reduce the likelihood of another lockdown.
19/03/2021If you are going to buy a face mask to protect yourself and others from COVID-19, make sure it is a three-layered mask. You might have already heard this recommendation, but researchers have now found an additional reason why three-layered masks are safer than single or double-layered alternatives.
16/03/2021Using supercomputer numerical modeling of saliva droplets' diffusion produced by coughs, researchers in Italy explore deactivating COVID-19 virus particles via UV-C light.
15/03/2021Researchers have come up with a better way to test which fabrics work best for masks that are meant to slow the spread of COVID-19. By testing those fabrics under conditions that mimic the humidity of a person's breath, the researchers have obtained measurements that more accurately reflect how the fabrics perform when worn by a living, breathing person.
01/03/2021Keeping your distance, washing your hands, wearing a mask – such protective measures have been the order of the day since the SARS-CoV-2 pandemic began. But appropriate products or procedures are not suitable for everyone, are often unavailable or, despite everything, carry a residual risk. The need for new, better solutions is high. But necessity is the mother of invention.
01/03/2021All hospitalized patients are susceptible to contracting a nosocomial infection, with ICU patients being particularly at risk. The effects of these hospital-acquired infections are often more dangerous than the original reason for the in-patient hospitalization. The "PACMAN" project is now testing an antimicrobial coating for frequently used contact surfaces at high risk of pathogen transmission.
01/03/2021Over 50% of our communication is made up of facial expressions and gestures. Nonverbal communication is especially important to deaf or hearing-impaired people or people with dementia. A conventional mask makes this more difficult, may promote miscommunication and contribute to medical errors in extreme cases. Yet it is paramount to use a mask amid this pandemic. Miama helps solve this problem.
01/03/2021When urgently needed products such as masks become scarce or conventional disinfection processes reach their limits, inventiveness is called for. And there is usually plenty of it in times of crisis. What innovations has the current corona pandemic already produced? How can they supplement or even replace existing products and processes?
25/02/2021Studies have shown that SARS-CoV-2 remains active on aerosols and surfaces for between several hours and several days, depending on the nature of the surface and environmental conditions.
03/02/2021Medical hygiene does not just play a key role during the COVID-19 pandemic. Preventing the transmission of infectious diseases and especially the spread of multidrug-resistant organisms is paramount even in non-pandemic times. While hygiene practices in hospitals and medical offices are essential, the industry can also make an important contribution with hygienic product design.
19/01/2021The risk of infection with SARS-CoV-2 is particularly high indoors. This is because, in addition to smear and droplet infection, infection via aerosols that accumulate and spread in the air is also possible there. Sufficient air exchange or air purification help to prevent this. The protective canopy developed by Fraunhofer IBP also follows such an approach.
02.11.2020This year is completely different! Normally, we would offer you an advanced peek into the MEDICA’s halls in Dusseldorf at this point. But due to the corona pandemic, the trade fair takes place online as virtual.MEDICA. We nevertheless took a look at this year’s topics of special interest.
02/11/2020Healthcare settings require sharp weapons to fight both hospital-acquired infections and pathogens like SARS-CoV-2. Besides protective equipment, regular room disinfection is one of them. But they require time and are also prone to error if done manually. Fully automated solutions are needed to relief hospital staff from this exhausting work and perform it reliably. So, why not fog the room?
02/11/2020Hospitals are considered to be a primary route of disease transmission. That is why patient rooms, operating rooms, and waiting areas should be disinfected regularly and thoroughly - and not just during the coronavirus pandemic. At the virtual.MEDICA trade fair, ICA Traffic GmbH will showcase the HERO21 robot, a disinfection unit that uses UVC radiation.
02/11/2020Whether it is hospitals or care homes - the right hygiene tools are crucial for process efficiency. These products can be composed of a wide variety of materials. NORAFIN offers a sustainable solution with products made from nonwoven fabric.
22/06/2020After professional sports and other sporting activities had been drastically limited to prevent COVID-19 spread, training facilities are now reopening to welcome recreational and competitive athletes. However, due to the ongoing pandemic, restrictions are still in place to lower the risk of human infection. EFSMA presents recommendations on a uniform approach to keeping athletes safe.
01/04/2020When biomedical researchers or diagnosticians work with potentially contagious materials like cell cultures, blood or tissue, they need absolute protection from pathogens. Both safety measures in the workspace and the correct tools and materials are key here. Learn in our Topic of the Month what is important for protection in the lab and what a safe laboratory looks like.
01/04/2020What goes in, must not come out - and must also not cause harm to anyone working inside the lab. That's perhaps a nice way of summing up "laboratory safety" in one sentence - at least wherever pathogens are handled in biological and medical settings. The necessary laboratory safety precautions primarily depend on what is waiting "inside".
23/03/2020Germs such as bacteria, viruses or pathogenic fungi can spread from one person to another through direct contact when we shake hands or touch objects. People touch door handles and push elevator buttons in public places and constantly move in and out of spaces. Regular manual high-level disinfection is practically impossible. UVentions GmbH has found an intelligent solution for this problem.
13/11/2018Germ-free, fast and precise - in order for interventions in the OR to run safely and smoothly, the rooms have to be equipped with specific operating equipment. This must not only comply with hygiene standards, but also guarantee sufficient free space and fast retrieval of patient data. We are visiting MEDICA 2018 to learn more about these innovations.
19/07/2018Today's ambulance features far more technology than meets the eye. But not everything is aimed at treating patients. Ambulance manufacturers must also ensure that their vehicles make a great workplace for the crews on board and can adapt to the different challenges of emergency medical services.
19/07/2018Studies show that young trauma surgeons are allowed to operate immediately after completing their training, but have not necessarily practiced as often as mandatorily required. And that even though training Doctors could take place without putting the patients in any danger - on realistic preparations in training centers.
19/07/2018The electronic patient record is only one of many examples that shows how difficult digitization is in the healthcare industry in Germany. So it is no wonder that this topic will dominate at MEDICA, the world's largest medical trade fair. At the same time, the suppliers of medical technology present themselves.
08/06/2018Every day, hospital staff has to manage complex processes to guarantee quality and patient safety. Yet in some areas, the use of checklists and manuals tends to be more cumbersome and not useful – as is the case in sterile processing. A new project studies how augmented reality can take all the necessary information into the staff's field of view.