Marco Binelli / ETH Zürich
3D-printed insoles measure sole pressure directly in the shoe
24.03.2023
Researchers at ETH Zurich, Empa and EPFL are developing a 3D-printed insole with integrated sensors that allows the pressure of the sole to be measured in the shoe and thus during any activity.
Fraunhofer ISC
Innovative in vitro eye irritation test to replace standard animal testing
10.03.2023
Researchers at the Translational Center for Regenerative Therapies TLC-RT of the Fraunhofer Institute for Silicate Research ISC want to work with partners to replace animal testing.
Satoshi Tanikawa, et al. 2023
Healing the brain: hydrogels enable neuronal tissue growth
03.03.2023
Synthetic hydrogels were shown to provide an effective scaffold for neuronal tissue growth in areas of brain damage, providing a possible approach for brain tissue reconstruction.
Georgia Tech
New ultrafast water disinfection method is more environmentally friendly
27.02.2023
Georgia Institute of Technology researchers have found a way to use small shocks of electricity to disinfect water, reducing energy consumption, cost, and environmental impact.
Kai Melde, MPI für medizinische Forschung
Creating 3D objects with sound
17.02.2023
Scientists from the Micro, Nano and Molecular Systems Lab at the Max Planck Institute for Medical Research and the Institute for Molecular Systems Engineering and Advanced Materials at Heidelberg University have created a new technology to assemble matter in 3D.
NTNU
Super quick COVID test uses new technology
13.02.2023
The ability of gold particles to reflect light in different colours is used in applications from stained glass to pregnancy tests. Now researchers are set to exploit the same properties in an ultra-fast sensor for the coronavirus.
Fraunhofer ISC
Bioresorbable membrane for healing internal and external wounds
10.02.2023
Fraunhofer researchers have succeeded in using the bioresorbable silica gel Renacer to produce an electrospun membrane that is neither cytotoxic to cells nor genotoxic.
Terasaki Institute for Biomedical Innovation
Contact lenses to treat dry eye syndrome
06.02.2023
A collaborative team from the Terasaki Institute for Biomedical Innovation (TIBI) has developed a contact lens prototype that is specifically designed to prevent contact lens-induced dry eye (CLIDE).
Tohoku University
Analyzing sweat via microelectronic fibers for non-invasive health monitoring
25.01.2023
Imagine if a t-shirt could analyze sweat, potentially alerting the wearer to any health abnormalities. Well, this is now closer to reality thanks to a research group's recent innovation.
Sustainable hospital – Cardiac catheter in the raw material cycle
03.01.2023
Particularly in hospitals, a lot of waste is generated due to the large number of disposable products. In the case of cardiac catheters, this is doubly annoying, as they contain precious metals such as platinum and copper. A pilot project has therefore been launched at the Heart and Diabetes Center NRW to return used catheters to the raw materials cycle.
Photology75
Radon: Face masks reduce radiation exposure
21.12.2022
Researchers from the GSI Helmholtzzentrum für Schwerionenforschung now have proven in a paper published in the “International Journal of Environmental Research and Public Health” that face masks - both FFP2 and surgical masks - strongly reduce lung exposure and thus the dose.
Empa
Watching viruses fail
20.12.2022
Using a new analytical method, Empa researchers have tracked viruses as they pass through face masks and compared their failure on the filter layers of different types of masks.
Asociación RUVID
Biomaterial capable of regenerating bones and preventing infections
15.12.2022
Researchers from the Bioengineering and Biomaterials Laboratory of Universidad Católica de Valencia (UCV) have developed a new porous material capable of regenerating bones and preventing infections at the same time.
Freudenberg Performance Materials
ProQuIV optimizes the production of nonwoven masks
12.12.2022
Producing infection control clothing requires a lot of energy and uses lots of material resources. Fraunhofer researchers have now developed a technology which helps to save materials and energy when producing nonwovens.
Lena Holm
Scientists develop gel made from spider silk proteins for biomedical applications
19.08.2022
Researchers at Karolinska Institutet in Sweden and the Swedish University of Agricultural Sciences have discovered that spider silk proteins can be fused to biologically active proteins and be converted into a gel at body temperature.
Fibers for fibers – Textile implants repair the body
08.06.2022
We are nowadays already able to weave implants out of artificial fibers that can replace tissue or heal injuries. Different materials like polymers or nitinol are used to create flexible shapes. But the materials and their uses can still be improved.
PantherMedia / Fotofabrika
How to reduce plastic waste: innovative process promises recycling of single-use face masks
01.03.2022
The COVID-19 pandemic forced the use of disposable face masks. Discarding them has become an environmental challenge on a global scale. This has prompted the Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE and the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT to develop an innovative recycling process for used plastics.
PantherMedia/Valery Vvoennyy
Medical consumables: Will the pandemic inspire more sustainable practices?
01.03.2022
The COVID-19 pandemic has prompted a global increase in healthcare commodities and medical consumables: demand for face masks, gloves, protective apparel, and other personal protective equipment has soared as a result. This also applies to rapid tests, reagents, laboratory equipment and supplies. But all this sparked a myriad of problems.
PantherMedia/srikijt
Sustainability and medical consumables – where to put the waste?
01.03.2022
Medicine produces a lot of waste through medical consumables like protective gear or laboratory equipment. All of this gets destroyed due to hygiene reasons after use, but it is nonetheless true: Our resources are not unlimited and medical waste is a burden for the environment, too.
PantherMedia/PhotoChowk
Improving strength, stretchiness and adhesion in hydrogels for wound healing
31.08.2021
Scientists use the adhesive capabilities of mussels as a model for optimizing hydrogels’ mechanical properties.
PantherMedia/Wavebreakmedia (YAYMicro)
Chronic wounds: new, inexpensive wound dressing
29.07.2021
An MSU-led team is developing an inexpensive biopolymer dressing to heal injuries like diabetic foot ulcers that affect millions of patients all over the world.
Daniel Hutchinson
Fracture setting method could replace metal plates
02.07.2021
A new biocompatible polymer-based composite material could soon replace metal plates in treating difficult and unstable fractures. Developed at KTH Royal Institute of Technology in Stockholm, the newly-developed material is as strong as dental composites yet non-toxic.
Luxinergy/kerkoc
Customized and freshly printed: 3D printing in orthopedics
01.07.2021
Creating custom-made medical devices to target individual patient needs: that is the core function and primary objective of orthopedics. Using 3D printers for this will make sense in the future. Luxinergy is an innovative Austrian technology company that specializes in the development of biocompatible resins and large-format 3D printers.
Digital orthopedic technology: scan, customize, print
01.07.2021
When auxiliary means like orthoses or prostheses do not come from the shelf, but are adapted to the wearer, this means true crafting: In the past, a plaster mold of a body part had to be made as a template to create an individual aid from it step by step. Fortunately, we have come a long way until today.
Purenum GmbH
CE Mark for medical device for effective removal of kidney stones
28.06.2021
In December 2017, Purenum GmbH started its business as a spin-off of Fraunhofer IFAM. Its mission is to develop biomimetic adhesives for use in medical technology.
Smart implant – Healing fractures autonomously with smart materials
07.06.2021
Lower leg fractures put a great strain on patients due to their long healing process. In the future, an intelligent implant could control how the bone grows together again and thus optimize the healing process. In our video, you can learn from the developers at Saarland University how this works and what role artificial intelligence plays here.
PantherMedia/sielemann
Medical devices: hygienic design combats pathogens
03.02.2021
Medical hygiene does not just play a key role during the COVID-19 pandemic. Preventing the transmission of infectious diseases and especially the spread of multidrug-resistant organisms is paramount even in non-pandemic times. While hygiene practices in hospitals and medical offices are essential, the industry can also make an important contribution with hygienic product design.
Intelligent implants: when the material is the key to the solution
01.02.2021
Today we use implants to stabilize or compensate for injuries inside the body and to aid in the healing process. Implants cannot act autonomously and treat the patient if they deem it necessary. However, it is just a matter of time before this happens because research on intelligent implant materials that respond to stimuli is on the cusp of a breakthrough.
Autonomous medical technology: independently in the body
01.02.2021
Therapies need to be carried out with high reliability by trained personal. This will not change in the future. But maybe we will be able to let systems in the patient’s body do some of the work. Some approaches are already aiming to make implants more independent so they will be able to flexibly react to changes. Read more in our Topic of the Month!
PantherMedia/Jakub Mrocek
Reviewing the evidence for cloth mask use among health care workers
13.01.2021
A rapid, evidence-based review summarizes the effectiveness of cloth masks in protecting health care clinicians from respiratory viral infections, such as COVID-19. Nine studies were included in the review, and all but one were conducted prior to the COVID-19 pandemic.
Printed life – possibilities and limits of bioprinting
01.12.2020
Implants, prostheses and various other components made of plastic, metal or ceramics are already being produced by additive manufacturing. But skin, blood vessels or entire organs from the printer – is that possible? For years now, intensive research has been underway into the production of biologically functional tissue using printing processes. Some things are already possible with bioprinting.
Sustainable Nonwoven Solutions Improve Hygiene
02.11.2020
Whether it is hospitals or care homes - the right hygiene tools are crucial for process efficiency. These products can be composed of a wide variety of materials. NORAFIN offers a sustainable solution with products made from nonwoven fabric.
PantherMedia / ImageSupply
How Hospitals Can Foster Environmental Sustainability
01.07.2020
When it comes to their environmental impact, hospitals present a challenge, yet can boost opportunities at the same time. They are an environmental burden due to a higher energy use resulting from frequently outdated technology. However, once they are modernized and switch to a sustainable concept, they can turn into a "green hospital".