27.02.2023Georgia Institute of Technology researchers have found a way to use small shocks of electricity to disinfect water, reducing energy consumption, cost, and environmental impact.
07.02.2023A group of researchers at Chalmers University of Technology in Sweden are presenting a new spray that can kill even antibiotic-resistant bacteria, and that can be used for wound care and directly on implants and other medical devices.
20.12.2022Using a new analytical method, Empa researchers have tracked viruses as they pass through face masks and compared their failure on the filter layers of different types of masks.
12.12.2022Producing infection control clothing requires a lot of energy and uses lots of material resources. Fraunhofer researchers have now developed a technology which helps to save materials and energy when producing nonwovens.
16.11.2022Safe reprocessing of medical instruments is particularly important in laboratory or hospital operations. It is good to have a reliable partner who does not shy away from any challenge: Steelco S.p.A. offers efficient and versatile solutions for even the most specific customer requirements of equipment and systems for washing, disinfection, and sterilization. We learn more at MEDICA 2022.
02.05.2022Disinfection and sterilization are the most reliable and best way to ensure patient safety in healthcare settings. Whether it is at the point of care when the patient is either at the hospital or medical practice, or wherever medical devices are manufactured and packaged in a sterile environment – the transmission of pathogens and microorganisms can have severe health impacts.
02.05.2022Due to the Corona pandemic, a lot of attention is currently focused on the protective effect of medical masks. But especially in medical work areas, the protection against aerosol transmission is not enough, because a lot of pathogens can be transmitted trough direct contact with people or surfaces. Hygienic measures against contact infections like these are very costly, though.
02.05.2022One of the most time-consuming tasks in hospitals is the manual cleaning and disinfection of high touch points and surfaces such as door handles, buttons, and switches. These are areas where microorganisms are spread by direct skin contact. The “MobDi – Mobile Disinfection” research project is developing a robot that automatically cleans and disinfects these areas. It will use cold plasma.
02.05.2022Applications of telemedicine surged in popularity in efforts to reduce the COVID-19 infection risk for both medical professionals and patients. Unfortunately, the services typically lack a proper diagnostic option.
01.03.2022Catheter ablation is a way to treat irregular heartbeats, or arrhythmias, like atrial fibrillation. Although catheters are classified as single-use or disposable devices, the complex instruments can be reused multiple times thanks to extensive reprocessing.
22.12.2021Despite myriad precautionary measures, virus-contaminated aerosols still pose a serious problem indoors. An invisible protective wall of UV-C ligh could provide a solution and reliably curb the spread of viruses and other pathogens in rooms in the future while allowing total freedom of movement.
25.05.2021One of the most time-consuming tasks in a hospital is the disinfection of often-used surfaces like light switches or door handles. This is especially important during the corona pandemic. The "DeKonBot" by Fraunhofer IPA could support hospital staff here in the future. Learn in our video interview with Dr. Birgit Graf how the robot works.
16.03.2021Using supercomputer numerical modeling of saliva droplets' diffusion produced by coughs, researchers in Italy explore deactivating COVID-19 virus particles via UV-C light.
01.03.2021All hospitalized patients are susceptible to contracting a nosocomial infection, with ICU patients being particularly at risk. The effects of these hospital-acquired infections are often more dangerous than the original reason for the in-patient hospitalization. The "PACMAN" project is now testing an antimicrobial coating for frequently used contact surfaces at high risk of pathogen transmission.
25.02.2021Studies have shown that SARS-CoV-2 remains active on aerosols and surfaces for between several hours and several days, depending on the nature of the surface and environmental conditions.
03.02.2021Medical hygiene does not just play a key role during the COVID-19 pandemic. Preventing the transmission of infectious diseases and especially the spread of multidrug-resistant organisms is paramount even in non-pandemic times. While hygiene practices in hospitals and medical offices are essential, the industry can also make an important contribution with hygienic product design.
02.11.2020This year is completely different! Normally, we would offer you an advanced peek into the MEDICA’s halls in Dusseldorf at this point. But due to the corona pandemic, the trade fair takes place online as virtual.MEDICA. We nevertheless took a look at this year’s topics of special interest.
02.11.2020Healthcare settings require sharp weapons to fight both hospital-acquired infections and pathogens like SARS-CoV-2. Besides protective equipment, regular room disinfection is one of them. But they require time and are also prone to error if done manually. Fully automated solutions are needed to relief hospital staff from this exhausting work and perform it reliably. So, why not fog the room?
01.04.2020Laboratories are sectioned into four biosafety levels to dictate the precautions required to isolate dangerous biological agents. The highest level of biological safety, BSL-4, is perhaps the most well-known when we think of containing pathogens and microbes. However, the fewest number of laboratories actually fall into the BSL-4 category.
01.04.2020What goes in, must not come out - and must also not cause harm to anyone working inside the lab. That's perhaps a nice way of summing up "laboratory safety" in one sentence - at least wherever pathogens are handled in biological and medical settings. The necessary laboratory safety precautions primarily depend on what is waiting "inside".
01.04.2020When biomedical researchers or diagnosticians work with potentially contagious materials like cell cultures, blood or tissue, they need absolute protection from pathogens. Both safety measures in the workspace and the correct tools and materials are key here. Learn in our Topic of the Month what is important for protection in the lab and what a safe laboratory looks like.
21.11.2019Hightech solutions for hygiene in the medical sector have been getting better and faster. There are not only machines that can disinfect everything by themselves, but there are portable and handy sterilisation solutions as well. At MEDICA 2019 you can find everything that is up-and-coming around medical hygiene.